chore: import upstream snapshot with attribution

init/CHANGELOG

@@ -0,0 +1,26 @@
+---- Changes since 1.150 ----
+On operating systems like FreeBSD and AIX that have a script which is run at system shutdown time, this script can now be edited. It will also be updated by the enable_at_boot and disable_at_boot functions to run any shutdown-time code for newly created actions.
+Added an access control option to allow only the starting and stopping of actions, but not editing.
+---- Changes since 1.170 ----
+Added buttons for starting and enabling actions at boot, and stopping and disabling.
+---- Changes since 1.250 ----
+On systems that have the chkconfig command installed, it will be used to enable and disable boot-time actions instead of Webmin creating the symlinks manually.
+---- Changes since 1.260 ----
+Added a Module Config option to disable the use of the chkconfig command for enabling and disabling actions.
+Added support for the FreeBSD 5.x rc.d bootup scripts directory.
+---- Changes since 1.290 ----
+Added a button on the main page for restarting multiple servers at once.
+---- Changes since 1.300 ----
+Added support for Unbuntu, which has not /etc/inittab file.
+---- Changes since 1.310 ----
+Added start_action and stop_action functions for starting and stopping services in an OS-independent manner.
+---- Changes since 1.390 ----
+Re-wrote all user interface code to use the new Webmin UI library, for a more consistent look.
+---- Changes since 1.400 ----
+Updated the API used by other modules to allow new actions to be created on MacOS X systems, such as the firewall startup script.
+---- Changes since 1.440 ----
+Converted commands in the module's API file to POD format, and added more details about each function.
+---- Changes since 1.540 ----
+Added support for the Upstart boot system, seen on Ubuntu 10 and later.
+---- Changes since 1.740 ----
+Added support for Launchd, as seen on newer MacOS X systems.

init/acl_security.pl

@@ -0,0 +1,35 @@
+
+require 'init-lib.pl';
+
+# acl_security_form(&options)
+# Output HTML for editing security options for the init module
+sub acl_security_form
+{
+my ($o) = @_;
+
+my $msg = $config{'local_script'} ? $text{'acl_script'} : $text{'acl_actions'};
+my @opts = ( [ 1, $text{'yes'} ] );
+if (!$config{'local_script'}) {
+	push(@opts, [ 2, $text{'acl_runonly'} ]);
+	}
+push(@opts, [ 0, $text{'no'} ]);
+print &ui_table_row($msg,
+	&ui_radio("bootup", $o->{'bootup'}, \@opts));
+
+print &ui_table_row($text{'acl_reboot'},
+	&ui_yesno_radio("reboot", $o->{'reboot'}));
+
+print &ui_table_row($text{'acl_shutdown'},
+	&ui_yesno_radio("shutdown", $o->{'shutdown'}));
+}
+
+# acl_security_save(&options)
+# Parse the form for security options for the init module
+sub acl_security_save
+{
+my ($o) = @_;
+$o->{'bootup'} = $in{'bootup'};
+$o->{'reboot'} = $in{'reboot'};
+$o->{'shutdown'} = $in{'shutdown'};
+}
+

init/atboot.pl

@@ -0,0 +1,152 @@
+#!/usr/local/bin/perl
+# atboot.pl
+# Called by setup.sh to have webmin started at boot time
+
+$no_acl_check++;
+require './init-lib.pl';
+$product = $ARGV[0] || "webmin";
+$ucproduct = ucfirst($product);
+
+$< == 0 || die "atboot.pl must be run as root";
+my $kill = &has_command("kill");
+
+if ($init_mode eq "osx") {
+	# Darwin System
+	&enable_at_boot($product, "Webmin administration server",
+			"$config_directory/.start-init >/dev/null 2>&1 </dev/null",
+			"$config_directory/.stop-init");
+	}
+elsif ($init_mode eq "local") {
+	# Add to the boot time rc script
+	$lref = &read_file_lines($config{'local_script'});
+	for($i=0; $i<@$lref && $lref->[$i] !~ /^exit\s/; $i++) { }
+	splice(@$lref, $i, 0, "$config_directory/.start-init >/dev/null 2>&1 </dev/null # Start $ucproduct");
+	&flush_file_lines();
+	}
+elsif ($init_mode eq "init") {
+	# Create a bootup action, if missing
+	@start = &get_start_runlevels();
+	$fn = &action_filename($product);
+	if (!-r $fn) {
+		&open_tempfile(ACTION,">$fn");
+		$desc = "Start/stop $ucproduct";
+		&print_tempfile(ACTION, "#!/bin/sh\n");
+		$start_order = "9" x $config{'order_digits'};
+		$stop_order = "9" x $config{'order_digits'};
+		if ($config{'chkconfig'}) {
+			# Redhat-style description: and chkconfig: lines
+			&print_tempfile(ACTION, "# description: $desc\n");
+			&print_tempfile(ACTION,
+				     "# chkconfig: $config{'chkconfig'} ",
+				     "$start_order $stop_order\n");
+			}
+		elsif ($config{'init_info'}) {
+			# Suse-style init info section
+			&print_tempfile(ACTION, "### BEGIN INIT INFO\n",
+				     "# Provides: $product\n",
+				     "# Required-Start: \$network \$syslog\n",
+				     "# Required-Stop: \$network\n",
+				     "# Default-Start: ",join(" ", @start),"\n",
+				     "# Default-Stop:\n",
+				     "# Description: $desc\n",
+				     "### END INIT INFO\n");
+			}
+		else {
+			# Just description in a comment
+			&print_tempfile(ACTION, "# $desc\n");
+			}
+		&print_tempfile(ACTION, "\n");
+		&print_tempfile(ACTION, "case \"\$1\" in\n");
+
+		&print_tempfile(ACTION, "'start')\n");
+		&print_tempfile(ACTION, "\t$config_directory/.start-init >/dev/null 2>&1 </dev/null\n");
+		&print_tempfile(ACTION, "\tRETVAL=\$?\n");
+		if ($config{'subsys'}) {
+			&print_tempfile(ACTION, "\tif [ \"\$RETVAL\" = \"0\" ]; then\n");
+			&print_tempfile(ACTION, "\t\ttouch $config{'subsys'}/$product\n");
+			&print_tempfile(ACTION, "\tfi\n");
+			}
+		&print_tempfile(ACTION, "\t;;\n");
+
+		&print_tempfile(ACTION, "'stop')\n");
+		&print_tempfile(ACTION, "\t$config_directory/.stop-init\n");
+		&print_tempfile(ACTION, "\tRETVAL=\$?\n");
+		if ($config{'subsys'}) {
+			&print_tempfile(ACTION, "\tif [ \"\$RETVAL\" = \"0\" ]; then\n");
+			&print_tempfile(ACTION, "\t\trm -f $config{'subsys'}/$product\n");
+			&print_tempfile(ACTION, "\tfi\n");
+			}
+		&print_tempfile(ACTION, "\t;;\n");
+
+		&print_tempfile(ACTION, "'status')\n");
+		&print_tempfile(ACTION, "\tpidfile=`grep \"^pidfile=\" $config_directory/miniserv.conf | sed -e 's/pidfile=//g'`\n");
+		&print_tempfile(ACTION, "\tif [ -s \$pidfile ]; then\n");
+		&print_tempfile(ACTION, "\t\tpid=`cat \$pidfile`\n");
+		&print_tempfile(ACTION, "\t\t$kill -0 \$pid >/dev/null 2>&1\n");
+		&print_tempfile(ACTION, "\t\tif [ \"\$?\" = \"0\" ]; then\n");
+		&print_tempfile(ACTION, "\t\t\techo \"$product (pid \$pid) is running\"\n");
+		&print_tempfile(ACTION, "\t\t\tRETVAL=0\n");
+		&print_tempfile(ACTION, "\t\telse\n");
+		&print_tempfile(ACTION, "\t\t\techo \"$product is stopped\"\n");
+		&print_tempfile(ACTION, "\t\t\tRETVAL=1\n");
+		&print_tempfile(ACTION, "\t\tfi\n");
+		&print_tempfile(ACTION, "\telse\n");
+		&print_tempfile(ACTION, "\t\techo \"$product is stopped\"\n");
+		&print_tempfile(ACTION, "\t\tRETVAL=1\n");
+		&print_tempfile(ACTION, "\tfi\n");
+		&print_tempfile(ACTION, "\t;;\n");
+
+		&print_tempfile(ACTION, "'restart')\n");
+		&print_tempfile(ACTION, "\t$config_directory/.stop-init ; $config_directory/.start-init\n");
+		&print_tempfile(ACTION, "\tRETVAL=\$?\n");
+		&print_tempfile(ACTION, "\t;;\n");
+
+		&print_tempfile(ACTION, "*)\n");
+		&print_tempfile(ACTION, "\techo \"Usage: \$0 { start | stop }\"\n");
+		&print_tempfile(ACTION, "\tRETVAL=1\n");
+		&print_tempfile(ACTION, "\t;;\n");
+		&print_tempfile(ACTION, "esac\n");
+		&print_tempfile(ACTION, "exit \$RETVAL\n");
+		&close_tempfile(ACTION);
+		chmod(0755, $fn);
+		}
+
+	# Add whatever links are needed to start at boot
+	&enable_at_boot($product);
+	print STDERR "Created init script $fn\n";
+	}
+elsif ($init_mode eq "win32") {
+	# Create win32 service
+	$perl_path = &get_perl_path();
+	&enable_at_boot($product, $ucproduct, $perl_path." ".&quote_path("$root_directory/miniserv.pl")." ".&quote_path("$config_directory/miniserv.conf"));
+	}
+elsif ($init_mode eq "systemd") {
+	# Create systemd
+	# See updateboot.pl
+	}
+elsif ($init_mode eq "openrc") {
+	# Create OpenRC script, if missing
+	&enable_at_boot($product, $ucproduct,
+	     "$config_directory/.start-init",
+	     "$config_directory/.stop-init",
+	     undef,
+	     { 'fork' => 1,
+	       'pidfile' => $var_directory."/miniserv.pid" });
+	}
+elsif ($init_mode eq "rc" || $init_mode eq "upstart") {
+	# Create RC or upstart script
+	&enable_at_boot($product, $ucproduct,
+	     "$config_directory/.start-init",
+	     "$config_directory/.stop-init",
+	     undef,
+	     { 'fork' => 1,
+	       'pidfile' => $var_directory."/miniserv.pid" });
+	}
+elsif ($init_mode eq "launchd") {
+	# Create launchd script
+	&create_launchd_agent(&launchd_name($product),
+		"$config_directory/.start-init --nofork", 1);
+	}
+
+$config{'atboot_product'} = $product;
+&save_module_config();

init/backup_config.pl

@@ -0,0 +1,57 @@
+
+do 'init-lib.pl';
+
+# backup_config_files()
+# Returns files and directories that can be backed up
+sub backup_config_files
+{
+local @rv;
+if ($config{'init_base'}) {
+	local $a;
+	foreach $a (&list_actions()) {
+		local @ac = split(/\s+/, $a);
+		push(@rv, $ac[0] =~ /^\// ? $ac[0]
+					  : "$config{'init_dir'}/$ac[0]");
+		local $ufile = "/etc/init/$ac[0]";
+		if (-r $ufile) {
+			push(@rv, $ufile);
+			}
+		}
+	}
+else {
+	# Just bootup and shutdown scripts
+	push(@rv, $config{'local_script'});
+	push(@rv, $config{'local_down'}) if ($config{'local_down'});
+	}
+return @rv;
+}
+
+# pre_backup(&files)
+# Called before the files are actually read
+sub pre_backup
+{
+return undef;
+}
+
+# post_backup(&files)
+# Called after the files are actually read
+sub post_backup
+{
+return undef;
+}
+
+# pre_restore(&files)
+# Called before the files are restored from a backup
+sub pre_restore
+{
+return undef;
+}
+
+# post_restore(&files)
+# Called after the files are restored from a backup
+sub post_restore
+{
+}
+
+1;
+

init/cgi_args.pl

@@ -0,0 +1,29 @@
+
+do 'init-lib.pl';
+
+sub cgi_args
+{
+my ($cgi) = @_;
+if ($cgi eq 'edit_action.cgi') {
+	# Link to init script
+	return 'none' if ($init_mode ne 'init');
+	my @iacts = &list_actions();
+	my @ac = split(/\s+/, $iacts[0]);
+	return '0+'.$ac[0];
+	}
+elsif ($cgi eq 'edit_hostconfig.cgi') {
+	return 'none' if ($init_mode ne 'osx');
+	my @hconf_set = &hostconfig_settings();
+	return '0+'.$hconf_set[0][0];
+	}
+elsif ($cgi eq 'edit_rc.cgi') {
+	return 'none' if ($init_mode ne 'rc');
+	my @rcs = &list_rc_scripts();
+	return 'name='.&urlize($rcs[0]->{'name'});
+	}
+elsif ($cgi eq 'reboot.cgi' || $cgi eq 'shutdown.cgi') {
+	# Link *without* confirm parameter
+	return '';
+	}
+return undef;
+}

init/change_rl.cgi

@@ -0,0 +1,19 @@
+#!/usr/local/bin/perl
+# change_rl.cgi
+# Switch to a different runlevel with the telinit command
+
+require './init-lib.pl';
+&ReadParse();
+$access{'bootup'} == 1 || &error($text{'change_ecannot'});
+my %ok_levels = map { $_, 1 } (&list_runlevels(), "S", "s");
+$ok_levels{$in{'level'}} || &error($text{'change_ecannot'});
+
+&ui_print_header(undef, $text{'change_title'}, "");
+
+$cmd = "telinit ".quotemeta($in{'level'});
+print "<p>",&text('change_cmd', $in{'level'}, "<tt>$cmd</tt>"),"<p>\n";
+&system_logged("$cmd </dev/null >/dev/null 2>&1 &");
+&webmin_log("telinit", $in{'level'});
+
+&ui_print_footer("", $text{'index_return'});
+

init/config-aix

@@ -0,0 +1,13 @@
+inittab_id=init
+expert=0
+reboot_command=reboot
+shutdown_command=shutdown -Fh
+init_base=
+order_digits=2
+desc=0
+init_dir=
+local_script=/etc/rc
+local_down=/etc/rc.shutdown
+status_check=0
+order=0
+sort_mode=0

init/config-alpine-linux

@@ -0,0 +1,11 @@
+init_mode=openrc
+init_base=/etc/runlevels
+init_dir=/etc/init.d
+reboot_command=reboot
+shutdown_command=poweroff
+expert=0
+desc=1
+status_check=1
+order=0
+sort_mode=0
+boot_levels=default

init/config-cobalt-linux-2.2-4.0

@@ -0,0 +1,14 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=reboot
+shutdown_command=halt
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-cobalt-linux-5.0-ALL

@@ -0,0 +1,15 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=reboot
+shutdown_command=halt
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-coherent-linux

@@ -0,0 +1,15 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=1
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-corel-linux

@@ -0,0 +1,12 @@
+init_base=/etc/
+init_dir=/etc/init.d
+reboot_command=reboot
+shutdown_command=halt
+order_digits=2
+inittab_id=id
+expert=0
+desc=1
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-debian-linux

@@ -0,0 +1,13 @@
+init_base=/etc/
+init_dir=/etc/init.d
+reboot_command=reboot
+shutdown_command=poweroff
+order_digits=2
+inittab_id=id
+expert=0
+desc=1
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5
+init_info=1

init/config-freebsd

@@ -0,0 +1,7 @@
+reboot_command=shutdown -r now
+shutdown_command=shutdown -p now
+local_script=/etc/rc.local
+local_down=/etc/rc.shutdown
+status_check=0
+order=0
+sort_mode=0

init/config-freebsd-5.0-ALL

@@ -0,0 +1,9 @@
+reboot_command=shutdown -r now
+shutdown_command=shutdown -p now
+local_script=/etc/rc.local
+local_down=/etc/rc.shutdown
+status_check=0
+order=0
+sort_mode=0
+rc_dir=/etc/rc.d /usr/local/etc/rc.d
+rc_conf=/etc/defaults/rc.conf /etc/rc.conf.d/* /etc/rc.conf

init/config-generic-linux

@@ -0,0 +1,13 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+expert=0
+desc=1
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-gentoo-linux

@@ -0,0 +1,9 @@
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+inittab_id=id
+expert=0
+desc=1
+status_check=0
+order=0
+sort_mode=0
+local_script=/etc/conf.d/local.start

init/config-hpux

@@ -0,0 +1,14 @@
+init_base=/sbin
+init_dir=/sbin/init.d
+reboot_command=shutdown -r
+shutdown_command=shutdown -h
+order_digits=3
+inittab_id=init
+desc=0
+expert=0
+status_check=0
+inittab_rl_4=4,3,2,1
+inittab_rl_3=3,2,1
+inittab_rl_2=2,1
+order=0
+sort_mode=0

init/config-irix

@@ -0,0 +1,11 @@
+init_base=/etc/
+init_dir=/etc/init.d
+reboot_command=/etc/reboot
+shutdown_command=/etc/shutdown -i0 -g0 -y
+order_digits=2
+inittab_id=is
+desc=0
+expert=0
+status_check=0
+order=0
+sort_mode=0

init/config-macos

@@ -0,0 +1,10 @@
+reboot_command=reboot
+shutdown_command=shutdown -h now
+local_script=/etc/rc
+startup_dirs=/System/Library/StartupItems:/Library/StartupItems
+darwin_setup=/Library/StartupItems
+hostconfig=/etc/hostconfig
+plist=StartupParameters.plist
+status_check=0
+order=0
+sort_mode=0

init/config-mandrake-linux

@@ -0,0 +1,15 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=1
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-msc-linux

@@ -0,0 +1,15 @@
+init_base=/etc/rc.d
+init_dir=/etc/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=1
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-netbsd

@@ -0,0 +1,6 @@
+reboot_command=reboot
+shutdown_command=halt
+local_script=/etc/rc.local
+status_check=0
+order=0
+sort_mode=0

init/config-open-linux

@@ -0,0 +1,12 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+desc=1
+expert=0
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-openSUSE-Linux-15.0-ALL

@@ -0,0 +1,14 @@
+init_base=/etc/init.d
+init_dir=/etc/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+expert=0
+desc=1
+status_check=0
+init_info=1
+order=0
+sort_mode=0
+boot_levels=2 3 5
+inittab_extra=boot

init/config-openbsd

@@ -0,0 +1,6 @@
+reboot_command=reboot
+shutdown_command=halt
+local_script=/etc/rc.local
+status_check=0
+order=0
+sort_mode=0

init/config-openmamba-linux

@@ -0,0 +1,15 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=1
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-openserver

@@ -0,0 +1,12 @@
+init_base=/etc/
+init_dir=/etc/init.d
+reboot_command=shutdown -i 6 -g 0 -y
+shutdown_command=shutdown -i 5 -g 0 -y
+order_digits=2
+inittab_id=is
+desc=0
+expert=0
+status_check=0
+inittab_rl_S=2
+order=0
+sort_mode=0

init/config-osf1

@@ -0,0 +1,14 @@
+inittab_id=is
+expert=0
+reboot_command=reboot
+shutdown_command=init 0
+init_base=/sbin
+local_script=
+desc=0
+order_digits=2
+init_dir=/sbin/init.d
+status_check=0
+inittab_rl_4=4,3,2
+inittab_rl_3=3,2
+order=0
+sort_mode=0

init/config-pardus-linux

@@ -0,0 +1,13 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+expert=0
+desc=1
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-redhat-linux

@@ -0,0 +1,15 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=1
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-slackware-linux

@@ -0,0 +1,7 @@
+reboot_command=reboot
+shutdown_command=halt
+local_script=/etc/rc.d/rc.local
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-solaris

@@ -0,0 +1,12 @@
+init_base=/etc/
+init_dir=/etc/init.d
+reboot_command=reboot
+shutdown_command=shutdown -i 5 -g 0 -y
+order_digits=2
+inittab_id=is
+desc=0
+expert=0
+inittab_rl_3=3,2
+status_check=0
+order=0
+sort_mode=0

init/config-solaris-10-ALL

@@ -0,0 +1,14 @@
+init_base=/etc/
+init_dir=/etc/init.d
+reboot_command=reboot
+shutdown_command=shutdown -i 5 -g 0 -y
+order_digits=2
+inittab_id=is
+desc=0
+expert=0
+inittab_rl_3=3,2
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2
+inittab_extra=2

init/config-suse-linux

@@ -0,0 +1,12 @@
+init_base=/sbin/init.d
+init_dir=/sbin/init.d
+reboot_command=reboot
+shutdown_command=halt
+order_digits=2
+inittab_id=id
+expert=0
+desc=0
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-suse-linux-7.1-ALL

@@ -0,0 +1,14 @@
+init_base=/etc/init.d
+init_dir=/etc/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+expert=0
+desc=1
+status_check=0
+init_info=1
+order=0
+sort_mode=0
+boot_levels=2 3 5
+inittab_extra=boot

init/config-syno-linux

@@ -0,0 +1,13 @@
+shutdown_command=/sbin/poweroff
+init_base=/usr/syno/etc/rc.d
+init_dir=/usr/syno/etc/rc.d
+extra_init=/etc/rc.d/rc.local
+order=1
+sort_mode=0
+order_digits=2
+reboot_command=/sbin/poweroff
+inittab_id=id
+expert=0
+status_check=1
+boot_levels=2 3 5
+desc=1

init/config-trustix-linux

@@ -0,0 +1,15 @@
+init_base=/etc
+init_dir=/etc/init.d
+reboot_command=shutdown -r now
+shutdown_command=shutdown -h now
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+expert=0
+desc=1
+status_check=1
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-turbo-linux

@@ -0,0 +1,15 @@
+init_base=/etc/rc.d
+init_dir=/etc/rc.d/init.d
+reboot_command=reboot
+shutdown_command=halt
+order_digits=2
+inittab_id=id
+extra_init=/etc/rc.d/rc.local
+chkconfig=2345
+subsys=/var/lock/subsys
+desc=1
+expert=0
+status_check=0
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-united-linux

@@ -0,0 +1,13 @@
+init_base=/etc/init.d
+init_dir=/etc/init.d
+reboot_command=reboot
+shutdown_command=halt
+order_digits=2
+inittab_id=id
+expert=0
+desc=1
+status_check=0
+init_info=1
+order=0
+sort_mode=0
+boot_levels=2 3 5

init/config-unixware

@@ -0,0 +1,11 @@
+init_base=/etc/
+init_dir=/etc/init.d
+reboot_command=reboot
+shutdown_command=shutdown -i 5 -g 0 -y
+order_digits=2
+inittab_id=is
+desc=0
+expert=0
+status_check=0
+order=0
+sort_mode=0

init/config-windows

@@ -0,0 +1,5 @@
+reboot_command=shutdown.exe -r -t 1 -f
+shutdown_command=shutdown.exe -s -t 1 -f
+status_check=0
+order=0
+sort_mode=0

init/config.info

@@ -0,0 +1,25 @@
+line1=Configurable options,11
+expert=Allow selection of individual runlevels?,1,1-Yes,0-No
+desc=Display actions with descriptions,1,2-Yes, and show all runlevels,1-Yes,0-No
+systemd_dedicated=Hide systemd services table?,1,-No,1-Yes
+order=Show boot order of actions?,1,1-Yes,0-No
+status_check=Show current status of actions,1,2-On index and action pages,1-On action page only,0-No
+sort_mode=Sort actions by,1,1-Boot order,0-Name
+line2=System configuration,11
+init_mode=Boot system,4,-Detect automatically,systemd-Systemd,init-SysV init,openrc-OpenRC,upstart-Upstart,local-Single boot script,rc-FreeBSD RC scripts,launchd-macOS launchd,osx-Legacy macOS StartupItems,win32-Windows services
+init_base=Directory in which runlevel directories are located,0
+init_dir=Directory containing master init scripts,0
+order_digits=Number of digits in action order,0
+boot_levels=Runlevels to create new actions in,3,From /etc/inittab
+local_script=Local startup commands script,3
+local_down=Local shutdown commands script,3,None
+reboot_command=Command to reboot the system,0
+shutdown_command=Command to shutdown the system,0
+inittab_id=inittab ID for bootup runlevel,0
+rc_dir=FreeBSD rc scripts directories,3,None
+rc_conf=FreeBSD configuration files,3,None
+line3=macOS StartupItems configuration,11
+startup_dirs=macOS StartupItems directories,0
+darwin_setup=Directory for custom StartupItems,0
+hostconfig=Legacy hostconfig file,0
+plist=Name of plist in a StartupItems directory,0

init/config.info.ca

@@ -0,0 +1,24 @@
+line1=Opcions configurables,11
+expert=Permet la selecció de nivells d'execució individuals,1,1-Sí,0-No
+desc=Mostra les accions amb descripcions,1,2-Sí, i mostra tots els nivells d'execució,1-Sí,0-No
+order=Mostra l'ordre d'engegada de les accions,1,1-Sí,0-No
+status_check=Mostra l'estat actual de les accions,1,2-A les pàgines d'índex i de l'acció,1-Només a la pàgina de l'acció,0-No
+sort_mode=Ordena les accions per,1,1-Ordre d'engegada,0-Nom
+line2=Configuració del sistema,11
+init_mode=Engegada del sistema,4,-Detecta-ho automàticament,systemd-Systemd,init-Init de SysV,openrc-OpenRC,upstart-Upstart,local-Script únic d'engegada,rc-Scripts RC de FreeBSD,launchd-macOS launchd,osx-Legacy macOS StartupItems,win32-Serveis Windows
+init_base=Directori on s'allotgen els directoris de nivells d'execució,0
+init_dir=Directori que conté els scripts init mestres,0
+order_digits=Nombre de dígits de l'ordre de l'acció,0
+boot_levels=Nivells d'execució en els quals s'han de crear accions noves,3,A partir de /etc/inittab
+local_script=Script local d'execució d'ordres,3
+local_down=Script d'ordres de tancament local,3,Cap
+reboot_command=Ordre de reinici del sistema,0
+shutdown_command=Ordre de tancament del sistema,0
+inittab_id=ID d'inittab per al nivell d'engegada per omissió,0
+rc_dir=Directori de scripts rc FreeBSD,3,Cap
+rc_conf=Fitxers de configuració FreeBSD,3,Cap
+line3=Configuració del sistema OSX,11
+startup_dirs=Directoris StartupItems Darwin,0
+darwin_setup=Directoris StartupItems Personalitzats,0
+hostconfig=Fitxer de configuració de host Darwin,0
+plist=Nom de plist d'un directori StartupItems,0

init/config.info.cs

@@ -0,0 +1,23 @@
+line1=Možnosti konfigurace,11
+expert=Povolit výběr jednotlivých úrovní běhu?,1,1-ano,0-ne
+desc=Zobrazit akce s popisy?,1,2-ano, a zobrazit všechny úrovně běhu,1-ano,0-ne
+order=Zobrazit pořadí bootování v akcích?,1,0-Ano,1-Ne
+status_check=Zobrazit aktuální stav akcí,1,2-jako seznam více akcí,1-kdy jedna stránka náleží jedné akci,0-ne
+sort_mode=Setřídit akce podle,1,1-pořadí při bootování,0-názvu
+line2=Konfigurace systému,11
+init_base=Adresář obsahující podadresáře úrovní běhu,0
+init_dir=Adresář obsahující hlavní init skripty,0
+order_digits=Počet cifer v pořadí akcí,0
+boot_levels=Úrovně spuštění při vytvoření nové akce v,3,Z /etc/inittab
+local_script=Skript lokálních spouštěcích příkazů,3
+local_down=skript pro příkaz lokálního shození,3,Nic
+reboot_command=Příkaz pro rebootování systému,0
+shutdown_command=Příkaz pro shození systému,0
+inittab_id=ID inittabu pro bootovací úroveň běhu,0
+rc_dir=Adresáře pro FreeBSD rc skripty,3,Nic
+rc_conf=Soubory FreeBSD konfigurace,3,Nic
+line3=Konfigurace OSX systému,11
+startup_dirs=Adresáře pro Darwin StartupItems,0
+darwin_setup=Adresáře pro vlastní StartupItems,0
+hostconfig=Darwin hostconfig soubor,0
+plist=Název plistu v StartupItems adresáři,0

init/config.info.de

@@ -0,0 +1,24 @@
+line1=Konfigurierbare Optionen,11
+expert=Erlaube die Auswahl einzelner Runlevel?,1,1-Ja,0-Nein
+desc=Zeige Aktionen mit Beschreibung,1,2-Ja, und zeige alle Runlevel an,1-Ja,0-Nein
+order=Zeige die Aktionen in Reihenfolge des Starts an?,1,1-Ja,0-Nein
+status_check=Zeige aktuellen Status der Aktionen,1,2-Auf Index- und Aktionen-Seite,1-Nur auf der Aktionen-Seite,0-Nein
+sort_mode=Sortiere Aktionen nach,1,1-Boot-Reihenfolge,0-Name
+line2=Systemkonfiguration,11
+init_mode=Boot-System,4,-automatisch erkennen,systemd-Systemd,init-SysV init,openrc-OpenRC,upstart-Upstart,local-Single Bootskript,rc-FreeBSD RC Script,launchd-macOS launchd,osx-Legacy macOS StartupItems,win32-Windows-Dienste
+init_base=Verzeichnis, in dem die Runlevel-Verzeichnisse liegen,0
+init_dir=Verzeichnis, in dem das Haupt-Skript liegt,0
+order_digits=Anzahl Ziffern in Aktionsreihenfolge,0
+boot_levels=Runlevel zur Erzeugung neuer Aktionen in,3,Aus /etc/inittab
+local_script=Lokales Start-Skript,3
+local_down=Lokales Shutdown-Skript,3,Keines
+reboot_command=Kommando zum Neustart des Systems,0
+shutdown_command=Kommando zum Herunterfahren des Systems,0
+inittab_id=Inittab-ID für Bootup-Runlevel,0
+rc_dir=FreeBSD rc Skripts Verzeichnisse,3,Keine
+rc_conf=FreeBSD Konfigurationsdateien,3,Keine
+line3=OSX Systemkonfiguration,11
+startup_dirs=Darwin 'StartupItems' Verzeichnisse,0
+darwin_setup=Verzeichnis für gewöhnliche 'StartupItems',0
+hostconfig=Darwin 'hostconfig'-Datei,0
+plist=Name der plist in einem 'StartupItems' Verzeichnis,0

init/config.info.es

@@ -0,0 +1,20 @@
+line1=Opciones configurables,11
+expert=Permitir selección de niveles individuales de ejecución,1,1-Sí,0-No
+desc=Mostrar acciones con descripciones,1,2-Sí, y mostrar todos los niveles de ejecución,1-Sí,0-No
+order=¿Mostrar el orden de arranque de las acciones?,1,1-Sí,0-No
+status_check=Mostrar estado actual de acciones,1,2-En índice y páginas de acción,1-Sólo en página de acción,0-No
+sort_mode=Ordenar acciones por,1,1-Orden de Arranque,0-Nombre
+line2=Configuración de Sistema,11
+init_base=Directorio en el cual están localizados los directorios de nivel de ejecución,0
+init_dir=Directorio que contiene los script de inicio principales,0
+order_digits=Número de dígitos en el orden de acción,0
+boot_levels=Niveles de ejecución en los que se crearán las nuevas acciones,3,Desde /etc/inittab
+local_script=Script de comandos de arranque local,3
+local_down=Script de comandos de apagado local,3,Ninguno
+reboot_command=Comando para rearrancar el sistema,0
+shutdown_command=Comando para apagar el sistema,0
+inittab_id=ID de inittab para nivel de ejecución en arranque,0
+startup_dirs=Directorios de Elementos de arranque de Darwin,0
+darwin_setup=Directorio para Elementos de Arranque de cliente,0
+hostconfig=Archivo de configuración de máquina de Darwin,0
+plist=Nombre de plist en directorio de elementos de Arranque,0

init/config.info.eu

@@ -0,0 +1,23 @@
+line1=Konfiguragarri diren aukerak,11
+expert=Baimendu maila bakarreko exekuzioen aukeraketa?,1,1-Bai,0-Ez
+desc=Erakutsi ekintzak deskribapenekin,1,2-Bai, eta erakutsi exekuzio-maila guztiak,1-Bai,0-Ez
+order=Ekintzen kargatze ordena erakutsi?1,1-bai,0-Ez
+status_check=Erakutsi ekintzen uneko egoera,1,2-Indize eta ekintza orrietan, 1- Ekintza orrietan soilk,0-Ez
+sort_mode=Ordenatu ekintzak,1,1-Karga ordenarekiko,0-Izenarekiko
+line2=Sistemaren konfigurazioa,11
+init_base=Exekuzio-mailen katalogoak kokatuta dauden katalogoa,0
+init_dir=Hasierako script nagusiak dituen katalogoa,0
+order_digits=Ekintzen ordenerako digitu kopurua,0
+boot_levels=Ekintza berriak sortuko diren exekuzio-mailak,3, /etc/inittab etik
+local_script=Abiatze lokalerako scripten komandoak,3
+local_down=Itzalera lokalerako scripten komandoak3,Ezer ez
+reboot_command=Sistema berrabiarazteko komandoa,0
+shutdown_command=Sistema itzaltzeko komandoa,0
+inittab_id=Abiatzeko unerako inittab-en ID-a exekuzio-mailarentzat
+rc_dir=FreeBSD rc scripten katalogoa,3,Ezer ez
+rc_conf=FreeBSD konfigurazioa fitxategiak,3,Ezer ez
+line3=OSX sistemaren konfigurazioa,11
+startup_dirs=Darwinen abiatzeko Elementuen (StartupItems) katalogoa,0
+darwin_setup=Bezeroaren abiatzeko Elementuen (StartupItems) katalogoa,0
+hostconfig=Darwinen makinaren konfigurazio fitxategia,0
+plist=Abiatzeko Elementuen katalogoko plist-en izena,0

init/config.info.fa

@@ -0,0 +1,20 @@
+line1=گزينه‌هاي قابل پيکربندي,11
+expert=آيا اجازه انتخاب سطح اجراها داده شود؟,1,1-بله,0-خير
+desc=آيا اعمال به همراه شرحها نشان داده شوند,1,2-بله و تمام سطوح اجرا نشان داده شوند,1-بله,0-خير 
+order=آيا ترتيب راه‌اندازي اعمال نشان داده شود؟,1,1-بله,0-خير
+status_check=نشان دادن وضعيت جاري اعمال,1,2- برروي صفحات شاخص و عمل,1-تنها برروي صفحه عمل,0-خير 
+sort_mode=مرتب سازي اعمال براساس,1,1-ترتيب راه‌اندازي,0-نام
+line2=پيکربندي سيستم,11
+init_base=فهرست راهنمايي که فهرستهاي راهنما سطح اجرا در آن قرار دارند,0
+init_dir=فهرست راهنمايي که دست نوشته‌هاي اصلي init در آن قرار دارند,0
+order_digits=تعداد ارقام در ترتيب اعمال,0
+boot_levels=ايجاد کردن اعمال جديد درسطح اجراي (هاي),3,از /etc/inittab
+local_script=دست نوشته فرمانهاي راه‌اندازي محلي مجدد,3
+local_down=دست نوشته فرمانهاي خاموش محلي,3,هيچ
+reboot_command=فرماني جهت بازآغازي سيستم,0
+shutdown_command=فرماني جهت خاموش کردن سيستم,0
+inittab_id=مقدار اوليه ID براي اجراي سطح1,0
+startup_dirs=فهرست راهنما اقلام راه‌اندازي darwin,0
+darwin_setup=فهرست راهنما براي اقلام سفارشي راه‌اندازي,0 
+hostconfig=پرونده پيکربندي ميزبان darwin
+plist=نام plist در فهرست راهنماي اقلام راه‌اندازي,0

init/config.info.fr

@@ -0,0 +1,19 @@
+line1=Options Configurables,11
+expert=Permetrre la selection de niveau de demarrage individuels ?,1,1-Oui,0-Non
+desc=Afficher actions avec description,1,2-Oui, et montrer tous les niveaux de demarrage,1-Oui,0-Non
+order=Montrer ordre de boot des actions ?,1,1-Oui,0-Non
+status_check=Montrer le satut courant des actions,1,2-Sur les pages Index et Action,1-Sur la page Action uniquement,0-Non
+sort_mode=Trier les actions par,1,1-Ordre de boot,0-Nom
+line2=Configuration du systeme,11
+init_base=Répertoire dans lequel les répertoires des niveaux d'exécution sont situés,0
+init_dir=Répertoire qui contient les scripts de démarrage,0
+order_digits=Nombre de chiffre dans l'ordre d'action,0
+boot_levels=Niveaux de demarrage creent nouvelles actions dans,3,/etc/inittab
+local_script=Script local de démarrage,3
+reboot_command=Commande pour redémarrer le système,0
+shutdown_command=Commande pour arrêter le système,0
+inittab_id=Numéro du niveau d'exécution du démarrage,0
+startup_dirs=Repertoires des StartupItems Darwin,0
+darwin_setup=Repertoire pour personnaliser StartupItems,0
+hostconfig=Fichier de configuration du poste Darwin,0
+plist=Nom de plist dans un repertoire de StartupItems,0

init/config.info.ja

@@ -0,0 +1,23 @@
+line1=設定可能なオプション,11
+expert=個々のランレベル毎の選択を許可しますか?,1,1-はい,0-いいえ
+desc=説明とアクションを表示する,1,2-はい, 全てのランレベルを表示,1-はい,0-いいえ
+order=アクションの起動順を表示しますか?,1,1-はい,0-いいえ
+status_check=アクションの現在状況の表示,1,2-インデックスとアクションページに,1-アクションページのみに,0-表示しない
+sort_mode=アクションの序列,1,1-起動順,0-名前
+line2=システム設定,11
+init_base=ランレベルディレクトリ(rc.dやinit.d)が格納されているディレクトリ,0
+init_dir=マスタinitスクリプトが格納されているディレクトリ,0
+order_digits=起動順内の数字の数,0
+boot_levels=新規アクションを作成するランレベル,3,/etc/inittabから
+local_script=ローカルなスタートアップ用コマンドのスクリプト,3
+local_down=ローカルなシャットダウン用コマンドのスクリプト,3,なし
+reboot_command=再起動コマンド,0
+shutdown_command=シャットダウンコマンド,0
+inittab_id=起動ランレベルのinittab ID,0
+rc_dir=FreeBSD rc スクリプトのディレクトリ,3,なし
+rc_conf=FreeBSD 設定ファイル,3,なし
+line3=OSX システム設定,11
+startup_dirs=Darwin スタートアップアイテム ディレクトリ,0
+darwin_setup=カスタムスタートアップアイテムのディレクトリ,0
+hostconfig=Darwin hostconfigファイル,0
+plist=スタートアップアイテムディレクトリ内のplist名,0

init/config.info.ko

@@ -0,0 +1,23 @@
+line1=설정 옵션,11
+expert=각 실행레벨의 선택 허가,1,1-예,0-아니오
+desc=설명과 함께 동작 출력,1,2-예, 그리고 모든 실행 레벨 보기,1-예,0-아니오
+order=동작의 부팅 순서 보기,1,1-예,0-아니오
+status_check=동작의 현재 상태 보기,1,2-인덱스와 동작 페이지,1-동작 페이지만,0-아니오
+sort_mode=동작 정렬,1,1-부트 순위,0-이름
+line2=시스템 설정,11
+init_base=실행 레벨 디렉토리가 위치할 디렉토리,0
+init_dir=주 init 스크립트가 위치할 디렉토리,0
+order_digits=동작 정렬 기준 레벨,0
+boot_levels=새 동작의 실행레벨,3,/etc/inittab 에서
+local_script=로컬 시작 명령 스크립트,3
+local_down=로컬 셧다운 명령 스크립트,3,없음
+reboot_command=시스템 리부트 명령,0
+shutdown_command=시스템 셧다운 명령,0
+inittab_id=bootup 실행레벨의 inittab ID,0
+rc_dir=FreeBSD rc 스크립트 디렉토리,3,없음
+rc_conf=FreeBSD 설정 파일
+line3=OSX 시스템 설정,11
+startup_dirs=Darwin 시작 항목 디렉토리,0
+darwin_setup=사용자 정의 시작 항목 디렉토리,0
+hostconfig=다윈 호스트 설정 파일,0
+plist=시작 항목 디렉토리의 plist 이름,0

init/config.info.nl

@@ -0,0 +1,23 @@
+line1=Configureerbare opties,11
+expert=Sta individuele selectie toe van runlevels?,1,1-Ja,0-Nee
+desc=Laat acties zien met omschrijvingen,1,2-Ja, en laat alle runlevels zien,1-Ja,0-Nee
+order=Laat de boot volgorde zien van de acties?,1,1-Ja,0-Nee
+status_check=Laat huidige status van acties zien,1,2-op index en actie pagina,1-Alleen op actie pagina,0-Nee
+sort_mode=Sorteer acties met,1,1-Boot volgorde,0-Naam
+line2=Systeem configuratie,11
+init_base=Directory waarin de runlevel directory's geplaatst zijn,0
+init_dir=Directory waarin de master init scripts geplaatst zijn,0
+order_digits=Aantal cijfers in actie volgorde,0
+boot_levels=Runlevels waar nieuwe acties in gemaakt worden,3,Van /etc/inittab
+local_script=Lokaal Opstart opdrachten script,3
+local_down=Lokaal Uitschakel opdrachten script,3,Geen
+reboot_command=Opdracht om het systeem te rebooten,0
+shutdown_command=Opdracht om het systeem uit te zetten,0
+inittab_id=inittab ID voor bootup runlevel,0
+rc_dir=FreeBSD rc scripts directory's,3,Geen
+rc_conf=FreeBSD configuratie files,3,Geen
+line3=OSX systeem configuratie,11
+startup_dirs=Darwin Items Opstart directory's,0
+darwin_setup=Directory voor handmatige Opstart Items,0
+hostconfig=Darwin hostconfig file,0
+plist=Naam van de plist in de Items Opstart directory,0

init/config.info.no

@@ -0,0 +1,24 @@
+line1=Konfigurerbare innstillinger,11
+expert=Tillat valg av individuelle kjørenivåer?,1,1-Ja,0-Nei
+desc=Vis handlinger med beskrivelser,1,2-Ja, og vis alle kjørenivåer,1-Ja,0-Nei
+order=Vis handlingenes oppstartsrekkefølge?1,1-Ja,0-Nei
+status_check=Vis handlingenes gjeldende status,1,2-På indeks- og handlingssider,1-Bare på handlingssider,0-Nei
+sort_mode=Sorter handlinger etter,1,1-Oppstartrekkefølge,0-Navn
+line2=System konfigurasjon,11
+init_mode=Oppstartssystem,4,-Oppdag automatisk,systemd-Systemd,init-SysV init,openrc-OpenRC,upstart-Upstart,local-Enkelt oppstartsscript,rc-FreeBSD RC scripts,launchd-macOS launchd,osx-Legacy macOS StartupItems,win32-Windows tjenester
+init_base=Katalog hvor kjøretids-kataloger finnes,0
+init_dir=Katalog som inneholder master init scripts,0
+order_digits=Antall sifre i handlingssortering,0
+boot_levels=Kjørenivåer som nye handlinger skal opprettes i,3,Fra /etc/inittab
+local_script=Lokalt script med oppstartskommandoer,3
+local_down=Lokalt script med shutdown kommandoer,3,Ingen
+reboot_command=Kommando for å omstarte systemet,0
+shutdown_command=Kommando for å slå av systemet,0
+inittab_id=inittab ID for oppstarts kjørenivå,0
+rc_dir=FreeCSD rc script kataloger,3,Ingen
+rc_conf=FreeBSD konfigurasjonsfiler,3,Ingen
+line3=OSX system konfigurasjon,11
+startup_dirs=Kataloger for Darwin StarttupItems,0
+darwin_setup=Katalog for egendefinerte oppstartselementer,0
+hostconfig=Darwin hostconfig fil,0
+plist=Navn på plist i sen StartupItems katalog,0

init/config.info.pl

@@ -0,0 +1,22 @@
+line1=Opcje konfiguracyjne,11
+expert=Pozwalać na wybór poszczególnych poziomów pracy systemu,1,1-Tak,0-Nie
+desc=Wyświetlać działania wraz z opisami,1,2,Tak, i pokazuj wszystkie poziomy,1-Tak,0-Nie
+order=Wyświetlać kolejność bootowania akcji?,1,1-Tak,0-Nie
+status_check=Pokazywać bieżący stan akcji,1,2-Na stronach indeksowej i akcji,1-Tylko na stronie akcji,0-Nie
+sort_mode=Sortuj akcje według,1,1-Kolejności bootowania,0-Nazwy
+line2=Konfiguracja systemu,11
+init_base=Katalog zawierający podkatalogi poziomów pracy,0
+init_dir=Katalog zawierający nadrzędne skrypty startowe,0
+order_digits=Liczba cyfr określających kolejność uruchamiania,0
+local_script=Lokalny skrypt poleceń startowych,3
+local_down=Lokalny skrypt poleceń wyłączania,3,Brak
+reboot_command=Polecenie restartujące system,0
+shutdown_command=Polecenie zamykające system,0
+inittab_id=ID inicjalnego poziomu pracy w inittab-ie,0
+rc_dir=Katalogi skryptów rc FreeBSD,3,Brak
+rc_conf=Plik konfiguracyjny FreeBSD,3,Brak
+line3=Konfiguracja systemu OSX,11
+startup_dirs=Katalogi StartupItems Darwina,0
+darwin_setup=Katalog dla indywidualnych StartupItems,0
+hostconfig=Plik hostconfig Darwina,0
+plist=Nazwa p-listy w katalogu StartupItems,0

init/config.info.ru

@@ -0,0 +1,23 @@
+line1=Настраиваемые параметры,11
+expert=Позволять выбирать отдельные уровни запуска,1,1-Да,0-Нет
+desc=Показывать описания сценариев,1,2-Да и показывать все уровни запуска,1-Да,0-Нет
+order=Показывать порядок загрузки сценариев?,1,1-Да,0-Нет
+status_check=Показывать текущее состояние,1,2-На страницах со списком и сценарием,1-Только на странице со сценарием,0-Нет
+sort_mode=Упорядочить сценарии по,1,1-Порядку загрузки,0-Имени
+line2=Системные параметры,11
+init_base=Каталог, в котором расположены каталоги уровней запуска,0
+init_dir=Каталог, содержащий главные сценарии инициализации,0
+order_digits=Количество цифр очередности выполнения сценария,0
+boot_levels=Уровни запуска для вновь создаваемых сценариев,3,Из /etc/inittab
+local_script=Сценарий локальных команд загрузки системы,3
+local_down=Сценарий локальных команд выключения системы,3,Нет
+reboot_command=Команда для перезагрузки системы,0
+shutdown_command=Команда для завершения работы системы,0
+inittab_id=Имя процесса inittab, задающего режим работы,0
+rc_dir=Каталоги с rc скриптами FreeBSD,3,None
+rc_conf=Конфигурационные файлы FreeBSD,3,None
+line3=Конфигурация системы OSX,11
+startup_dirs=Каталоги Darwin StartupItems,0
+darwin_setup=Каталоги StartupItems пользователя,0
+hostconfig=Файл hostconfig Darwin,0
+plist=Название plist в каталоге StartupItems,0

init/config.info.sv

@@ -0,0 +1,10 @@
+expert=Tillåt individuella körnivåer,1,1-Ja,0-Nej
+desc=Visa funktioner med beskrivningar,1,1-Ja,0-Nej
+status_check=Visa aktuell funktionsstatus,1,2-På index- och funktionssidor,1-Endast på funktionssidor,0-Nej
+init_base=Katalog för körnivå-kataloger,0
+init_dir=Katalog för master-init-script,0
+order_digits=Antal siffror i utförandeordning,0
+local_script=Lokalt startkommandoscript,3
+reboot_command=Kommando för att starta om systemet,0
+shutdown_command=Kommando för att stänga av systemet,0
+inittab_id=inittab-ID för startkörnivå,0

init/config.info.tr

@@ -0,0 +1,9 @@
+expert=Kişisel çalışma seviyesinin seçimine izin verilsin,1,1-Evet,0-Hayır
+desc=İşlemleri açıklamaları ile görüntüle,1,1-Evet,0-Hayır
+init_base=Çalışma seviyelerinin olduğu dizin,0
+init_dir=Directory containing master init scripts,0
+order_digits=İşlem sıralamasındaki rakam sayısı,0
+local_script=Yerel başlangıç komutları betiği,3
+reboot_command=Sistemi yeniden başlatma komutu,0
+shutdown_command=Sistemi kapatma komutu,0
+inittab_id=Açılış çalışma seviyesi için inittab ID ,0

init/config.info.uk

@@ -0,0 +1,16 @@
+line1=Параметри, що настроюються,11
+expert=Дозволяти вибирати окремі рівні запуску,1,1-да,0-немає
+desc=Показувати опису сценаріїв,1,2-да і показувати всі рівні запуску,1-да,0-немає
+status_check=Показувати поточне стан,1,2-на сторінках зі списком і сценарієм,1-тільки на сторінці зі сценарієм,0-немає
+line2=Системні параметри,11
+init_base=Каталог, у який розташовані каталоги рівнів запуску,0
+init_dir=Каталог&$44; утримуючий головні сценарії ініціалізації,0
+order_digits=Кількість цифр черговості виконання сценарію,0
+local_script=Сценарій локальних команд завантаження системи,3
+reboot_command=Команда для перезавантаження системи,0
+shutdown_command=Команда для завершення роботи системи,0
+inittab_id=Ім'я процесу inittab, режим роботи, що задає,0
+startup_dirs=Каталоги Darwin StartupItems,0
+darwin_setup=Каталоги StartupItems користувача,0
+hostconfig=Файл hostconfig Darwin,0
+plist=Назва plist у каталозі StartupItems,0

init/config.info.zh

@@ -0,0 +1,9 @@
+expert=允许选择单独的运行级别,1,1-是,0-否
+desc=显示 descriptions 的动作,1,1-是,0-否
+init_base=运行级别目录被定位的目录,0
+init_dir=包含主初始化脚本的目录,0
+order_digits=执行顺序的数字个数,0
+local_script=本地启动命令脚本,3
+reboot_command=重启系统命令,0
+shutdown_command=关机命令,0
+inittab_id=引导级别的inittab ID,0

init/config.info.zh_TW

@@ -0,0 +1,14 @@
+expert=是否允許選擇個別的執行層級,1,1-是,0-否
+desc=顯示動作時是否同時顯示說明,1,1-是,0-否
+status_check=顯示目前動作狀態,1,2-在目錄和動作列表頁面,1-只在動作列表頁面,0-不顯示
+init_base=執行層級的目錄放置的路徑,0
+init_dir=包含主要起始化命令稿的路徑,0
+order_digits=命令順序的位置,0
+local_script=本地端啟動指令稿,3
+reboot_command=重新開機的命令,0
+shutdown_command=關閉系統的命令,0
+inittab_id=開機執行階層在 inittab 中的編號,0
+startup_dirs=達爾文(Darwin)開機項目目錄,0
+darwin_setup=自定開機項目目錄,0
+hostconfig=達爾文(Darwin)主機位置設定檔,0
+plist=啟動項目名稱列表目錄,0

init/create-boot.pl

@@ -0,0 +1,18 @@
+#!/usr/local/bin/perl
+# Creates some boot-time action
+
+package init;
+$ENV{'WEBMIN_CONFIG'} ||= "/etc/webmin";
+$ENV{'WEBMIN_VAR'} ||= "/var/webmin";
+if ($0 =~ /^(.*\/)[^\/]+$/) {
+	chdir($1);
+	}
+chop($pwd = `pwd`);
+$0 = "$pwd/create-boot.pl";
+require './init-lib.pl';
+$< == 0 || die "$0 must be run as root";
+
+@ARGV >= 1 && @ARGV <= 4 ||
+	die "usage: create-boot.pl <name> [desc] [start-code] [stop-code]";
+
+&enable_at_boot(@ARGV);

init/defaultacl

@@ -0,0 +1,4 @@
+bootup=1
+reboot=1
+shutdown=1
+noconfig=0

init/delboot.pl

@@ -0,0 +1,24 @@
+#!/usr/local/bin/perl
+# delboot.pl
+# Called by uninstall.sh to stop webmin being started at boot time
+
+$no_acl_check++;
+require './init-lib.pl';
+$product = $config{'atboot_product'} || "webmin";
+$ucproduct = ucfirst($product);
+
+if ($init_mode eq "local") {
+	# Remove from /etc/webmin/start from boot time rc script
+	open(LOCAL, "<".$config{'local_script'});
+	@local = <LOCAL>;
+	close(LOCAL);
+	$start = "$config_directory/start";
+	&open_tempfile(LOCAL, ">$config{'local_script'}");
+	&print_tempfile(LOCAL, grep { !/^$start/ } @local);
+	&close_tempfile(LOCAL);
+	print "Deleted from bootup script $config{'local_script'}\n";
+	}
+else {
+	# Use generic delete function
+	&delete_at_boot($product);
+	}

init/delete-boot.pl

@@ -0,0 +1,18 @@
+#!/usr/local/bin/perl
+# Disable some boot-time action
+
+package init;
+$ENV{'WEBMIN_CONFIG'} ||= "/etc/webmin";
+$ENV{'WEBMIN_VAR'} ||= "/var/webmin";
+if ($0 =~ /^(.*\/)[^\/]+$/) {
+	chdir($1);
+	}
+chop($pwd = `pwd`);
+$0 = "$pwd/delete-boot.pl";
+require './init-lib.pl';
+$< == 0 || die "$0 must be run as root";
+
+@ARGV == 1 ||
+	die "usage: delete-boot.pl <name>";
+
+&disable_at_boot(@ARGV);

init/delete_action.cgi

@@ -0,0 +1,33 @@
+#!/usr/local/bin/perl
+# delete_action.cgi
+# Delete an existing action and remove it from all the runlevels
+
+require './init-lib.pl';
+&ReadParse();
+$access{'bootup'} == 1 || &error($text{'save_ecannot'});
+
+if ($in{type} == 0) {
+	# Deleting a normal action
+	foreach (&action_levels('S', $in{action})) {
+		/^(\S+)\s+(\S+)\s+(\S+)$/;
+		&delete_rl_action($in{action}, $1, 'S');
+		}
+	foreach (&action_levels('K', $in{action})) {
+		/^(\S+)\s+(\S+)\s+(\S+)$/;
+		&delete_rl_action($in{action}, $1, 'K');
+		}
+	$file = &action_filename($in{action});
+	}
+elsif ($in{type} == 1) {
+	# deleting an odd action
+	$file = &runlevel_filename($in{runlevel}, $in{startstop},
+				   $in{number}, $in{action});
+	}
+if (&has_command("insserv")) {
+	&system_logged("insserv -r ".quotemeta($in{action}));
+	}
+&unlink_logged("/etc/init/$in{'action'}.conf");
+&unlink_logged($file);
+&webmin_log('delete', 'action', $in{'action'});
+&redirect("");
+

init/edit_action.cgi

@@ -0,0 +1,196 @@
+#!/usr/local/bin/perl
+# edit_action.cgi
+# Edit or create a bootup action. Existing actions can either be in the
+# init.d directory (and linked to from the appropriate runlevels), or
+# just plain runlevel files
+
+require './init-lib.pl';
+$access{'bootup'} || &error($text{'edit_ecannot'});
+
+$ty = $ARGV[0];
+if ($ty == 0) {
+	# Editing an action in init.d, linked to from various runlevels
+	$ac = $ARGV[1];
+	&ui_print_header(undef, $text{'edit_title'}, "");
+	$file = &action_filename($ac);
+	$data = &read_file_contents($file);
+	$hasarg = &get_action_args($file);
+	}
+elsif ($ty == 1) {
+	# Editing an action in one of the runlevels
+	$rl = $ARGV[1];
+	$num = $ARGV[2];
+	$ac = $ARGV[3];
+	$inode = $ARGV[4];
+	$ss = $ARGV[5];
+	&ui_print_header(undef, $text{'edit_title'}, "");
+	$file = &runlevel_filename($rl, $ss, $num, $ac);
+	$data = &read_file_contents($file);
+	}
+else {
+	# Creating a new action in init.d
+	&ui_print_header(undef, $text{'create_title'}, "");
+	}
+
+print &ui_form_start("save_action.cgi", "form-data");
+print &ui_table_start($text{'edit_details'}, "width=100%", 2);
+print &ui_hidden("type", $ty);
+
+if ($ty != 2) {
+	print &ui_hidden("old", $ac);
+	print &ui_hidden("file", $file);
+	if ($ty == 1) {
+		print &ui_hidden("runlevel", $rl);
+		print &ui_hidden("startstop", $ss);
+		print &ui_hidden("number", $num);
+		}
+	}
+
+# Action name
+if ($ac =~ /^\// || $access{'bootup'} == 2) {
+	print &ui_table_row($text{'edit_name'}, "<tt>$ac</tt>");
+	print &ui_hidden("name", $ac);
+	print &ui_hidden("extra", 1);
+	}
+else {
+	print &ui_table_row($text{'edit_name'},
+			    &ui_textbox("name", $ac, 30));
+	}
+
+if ($ty == 2) {
+	# Display fields for a template for a new action
+	print &ui_table_row($text{'edit_desc'},
+		&ui_textarea("desc", undef, 2, 80));
+
+	if ($supports_start_stop_msg) {
+		print &ui_table_row($text{'edit_startmsg'},
+			&ui_textbox("start_msg", undef, 40));
+
+		print &ui_table_row($text{'edit_stopmsg'},
+			&ui_textbox("stop_msg", undef, 40));
+		}
+
+	print &ui_table_row($text{'edit_start'},
+		&ui_textarea("start", undef, 5, 80));
+
+	print &ui_table_row($text{'edit_stop'},
+		&ui_textarea("stop", undef, 5, 80));
+	}
+elsif ($access{'bootup'} == 2) {
+	# Just show current script
+	print &ui_table_row($text{'edit_script'},
+		&ui_textarea("data", $data, 15, 80, undef, undef,
+			     "readonly=true"));
+	}
+else {
+	# Allow direct editing of the script
+	print &ui_table_row($text{'edit_script'},
+		&ui_textarea("data", $data, 15, 80));
+	}
+
+if ($ty == 1 && $access{'bootup'} == 1) {
+	# Display a message about the script being bogus
+	print &ui_table_end();
+	print "<b>",&text("edit_bad$ss", $rl),"</b><br>\n";
+	print &ui_link("fix_action.cgi?$rl+$ss+$num+$ac", $text{'edit_fix'});
+	print "<p>\n";
+	}
+elsif (!$config{'expert'} || $access{'bootup'} == 2) {
+	# Just tell the user if this action is started at boot time
+	local $boot = 0;
+	if ($ty == 0) {
+		local @boot = &get_inittab_runlevel();
+		foreach $s (&action_levels('S', $ac)) {
+			local ($l, $p) = split(/\s+/, $s);
+			$boot = 1 if (&indexof($l, @boot) >= 0);
+			}
+		print &ui_hidden("oldboot", $boot);
+		}
+	if ($access{'bootup'} == 1) {
+		print &ui_table_row($text{'edit_boot'},
+			&ui_yesno_radio("boot", $boot || $ty == 2 ? 1 : 0));
+		}
+	else {
+		print &ui_table_row($text{'edit_boot'},
+			$boot || $ty == 2 ? $text{'yes'} : $text{'no'});
+		}
+
+	# Show if action is currently running
+	if ($hasarg->{'status'} && $config{'status_check'}) {
+		$r = &action_running($file);
+		if ($r == 0) {
+			$status = "<font color=#ff0000>$text{'no'}</font>";
+			}
+		elsif ($r == 1) {
+			$status = $text{'yes'};
+			}
+		else {
+			$status = "<i>$text{'edit_unknown'}</i>";
+			}
+		print &ui_table_row($text{'edit_status'}, $status);
+		}
+	print &ui_table_end();
+	}
+else {
+	print &ui_table_end();
+
+	# Display which runlevels the action is started/stopped in
+	print &ui_table_start($text{'edit_levels'}, "width=100%", 4);
+	if ($ac) {
+		foreach $s (&action_levels('S', $ac)) {
+			@s = split(/\s+/, $s);
+			$spri{$s[0]} = $s[1];
+			}
+		foreach $k (&action_levels('K', $ac)) {
+			@k = split(/\s+/, $k);
+			$kpri{$k[0]} = $k[1];
+			}
+		}
+	@boot = &get_inittab_runlevel();
+	foreach $rl (&list_runlevels()) {
+		if (&indexof($rl, @boot) == -1) {
+			$label = &text('edit_rl', $rl);
+			}
+		else {
+			$label = "<i>".&text('edit_rl', $rl)."</i>";
+			}
+
+		$od = $config{'order_digits'};
+		$msg = &ui_checkbox("S$rl", 1, $text{'edit_startat'},
+				    defined($spri{$rl}))." ".
+		       &ui_textbox("pri_S$rl", $spri{$rl}, $od)."\n".
+		       &ui_checkbox("K$rl", 1, $text{'edit_stopat'},
+				    defined($kpri{$rl}))." ".
+		       &ui_textbox("pri_K$rl", $kpri{$rl}, $od);
+		print &ui_table_row($label, $msg);
+		}
+	print &ui_table_end();
+	}
+
+if ($ty != 2) {
+	if ($access{'bootup'} == 1) {
+		push(@buts, [ undef, $text{'save'} ]);
+		}
+
+	# Buttons to start and stop
+	$args = join("+", @ARGV);
+	print &ui_hidden("back", "edit_action.cgi?$args");
+	foreach $a (@action_buttons) {
+		if ($a eq 'start' || $a eq 'stop' || $hasarg->{$a}) {
+			push(@buts, [ $a, $text{'edit_'.$a.'now'} ]);
+			}
+		}
+
+	# Button to delete
+	if ($access{'bootup'} == 1) {
+		push(@buts, [ "delete", $text{'delete'} ]);
+		}
+	print &ui_form_end(\@buts);
+	}
+else {
+	print &ui_form_end([ [ undef, $text{'create'} ] ]);
+	}
+
+&ui_print_footer("", $text{'index_return'});
+
+

init/edit_hostconfig.cgi

@@ -0,0 +1,178 @@
+#!/usr/local/bin/perl
+# edit_hostconfig.cgi
+#
+# Edit the settings in the hostconfig file, or the
+# StartupItems script or plist associated with the
+# action described in the hostconfig file.
+#
+# Also create a new startup action with associated script and plist
+# and manually modify hostconfig file.
+
+require './init-lib.pl';
+require './hostconfig-lib.pl';
+use File::Basename;
+$access{'bootup'} == 1 || &error($text{'edit_ecannot'});
+
+$ty = $ARGV[0];
+if ($ty == 0) {
+	# Editing an existing action in /etc/hostconfig
+	$action_to_edit = $ARGV[1];
+	&ui_print_header(undef, $text{'edit_title'}, "");
+	%startuphash = &hostconfig_gather(startscript);
+	$startscript = $startuphash{"$action_to_edit"};
+	if ( $startscript ne "") {
+		$startupdir = dirname("$startscript");
+		$plistedit = "$startupdir/$config{'plist'}";
+		}
+	else {
+		$plistedit = "";
+		}
+
+	#create the action edit table
+	$actionedit = &hostconfig_editaction("$action_to_edit", "$startscript");
+	print "<form action=modifyhostconfig.cgi method=post name=hostmod>\n";
+	print "<table width=\"100%\" border><tr $tb> <td><b>", &text('index_action'), "</b></td>\n";
+	print "<td><b>", &text('index_setting'), "</b></td></tr>\n";
+	print "<tr $cb><td valign=middle>$action_to_edit</td>\n";
+	print "<td>$actionedit</td></tr></table>\n";
+	print "<input type=submit value='$text{'save'}'></form>\n";
+	
+	
+	#create the edit file forms
+	if ($startscript ne "") {
+		print &ui_hr();
+		print &text('edit_hostconfig_startup',
+			"<tt>$startscript</tt>"),"<br>\n";
+		#	}
+		print "<form action=save_startscript.cgi method=post>\n";
+		print "<textarea name=startup rows=20 cols=80>";
+		open(STARTSCRIPT, "<$startscript");
+		while(<STARTSCRIPT>) { print; }
+		close(STARTSCRIPT);
+		print "</textarea><br>\n";
+		print "<input type=hidden name=\"action\" value=\"$action_to_edit\">\n";
+		print "<input type=submit value='$text{'save'}'></form>\n";
+		}
+	if ($plistedit ne "") {
+		print &ui_hr();
+		print &text('edit_hostconfig_plist',
+			"<tt>$plistedit</tt>"),"<br>\n";
+		#	}
+		print "<form action=save_startscript.cgi method=post>\n";
+		print "<textarea name=plist rows=20 cols=80>";
+		open(PLIST, "<$plistedit");
+		while(<PLIST>) { print; }
+		close(PLIST);
+		print "</textarea><br>\n";
+		print "<input type=hidden name=\"action\" value=\"$action_to_edit\">\n";
+#		print "$plistedit</textarea><br>\n";
+		print "<input type=submit value='$text{'save'}'></form>\n";
+		}
+	}
+
+if ($ty == 1) {
+	&ui_print_header(undef, $text{'edit_hostconfig_new'}, "");
+	print "<HR>\n";
+
+	print "<P>\n", &text('edit_hostconfig_noquotes',
+		"<tt>$text{'edit_start'}</tt>"),"\n";
+
+	print "<P>\n", &text('edit_hostconfig_startitems',
+		"<tt>$text{'edit_hostconfig_actionname'}</tt>",
+		"<tt>$text{'edit_hostconfig_scriptname'}</tt>"),"\n";
+
+	print "<P>\n", &text('edit_hostconfig_array',
+		"<tt>Provides</tt>", "<tt>Requires</tt>", "<tt>Uses</tt>"),"\n";
+	
+	print "<P>\n $text{'edit_hostconfig_further'}\n";
+
+	#print "<form method=post action=save_hostconfig_action.cgi enctype=multipart/form-data>\n";
+	print "<form method=post action=save_hostconfig_action.cgi>\n";
+	print "<table border>\n";
+	print "<tr $tb><td><b>Action Details</b></td></tr>\n";
+	print "<tr $cb><td><table cellpadding=3>\n";
+
+	# create the form fields
+
+	$textt=&hostconfig_createtext("Action Name","req");
+	print "<tr>", &hostconfig_createtext("$text{'edit_hostconfig_actionname'}","req");
+	print "<td><input size=20 name=action_name value=\"\"></td></tr>\n";
+	
+	print "<tr>", &hostconfig_createtext("$text{'edit_hostconfig_scriptname'}","req");
+	print "<td><input size=20 name=script_name value=\"\"></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("$text{'edit_start'}","req");
+	print "<td><font size=-1><textarea rows=5 cols=80 name=execute></textarea></font></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("$text{'index_desc'}","");
+	print "<td><input size=60 name=description value=\"\"></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("Provides","");
+	print "<td><input size=60 name=provides value=\"\"></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("Requires","");
+	print "<td><input size=60 name=requires value=\"\"></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("Uses","");
+	print "<td><input size=60 name=uses value=\"\"></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("OrderPreference","");
+	print "<td><SELECT name=order><option value=First>First</option>",
+			"<option value=Early>Early</option>",
+			"<option value='None selected'>None</option>",
+			"<option value=Late>Late</option>",
+			"<option value=Last>Last</option>",
+			"</select></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("Start Message","");
+	print "<td><input size=60 name=start value=\"\"></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("Stop Message","");
+	print "<td><input size=60 name=stop value=\"\"></td></tr>\n";
+
+	print "<tr>", &hostconfig_createtext("Start at boot time?","");
+	print "<td><input name=boot type=radio value=\"-YES-\"> Yes\n";
+	print "<input name=boot type=radio value=\"-NO-\" checked> No</td></tr>\n";
+
+	print "<tr><td><font size=-1 color=#ff0000>* required field</font></td><td> </td></tr>\n";
+	print "</table>";
+	print "</td></tr></table>\n";
+	print "<input type=submit value=\"Create\"></form>\n";
+
+	}
+
+if ($ty == 2) {
+	
+	&ui_print_header(undef, $text{'edit_hostconfig_title'}, "");
+	print &text('edit_hostconfig_hostconfig',
+		"<tt>$config{'hostconfig'}</tt>"),"<br>\n";
+	print "<form action=save_startscript.cgi method=post>\n";
+	print "<textarea name=hostconfig rows=20 cols=80>";
+	open(LOCAL, "<$config{'hostconfig'}");
+	while(<LOCAL>) { print; }
+	close(LOCAL);
+	print "</textarea><br>\n";
+	print "<input type=submit value='$text{'save'}'></form>\n";
+	print &ui_hr();
+
+	#add reboot and shutdown messages to this page as well...
+	print "<table cellpadding=5 width=100%>\n";
+	if ($access{'reboot'}) {
+		print "<form action=reboot.cgi>\n";
+		print "<tr> <td><input type=submit ",
+			"value=\"$text{'index_reboot'}\"></td>\n";
+		print "</form>\n";
+		print "<td>$text{'index_rebootmsg'}</td> </tr>\n";
+		}
+
+	if ($access{'shutdown'}) {
+		print "<form action=shutdown.cgi>\n";
+		print "<tr> <td><input type=submit ",
+			"value=\"$text{'index_shutdown'}\"></td>\n";
+		print "</form>\n";
+		print "<td>$text{'index_shutdownmsg'}</td> </tr>\n";
+		}
+	print "</table>\n";
+	}
+	
+&ui_print_footer("", $text{'index_return'});

init/edit_launchd.cgi

@@ -0,0 +1,77 @@
+#!/usr/local/bin/perl
+# Show a form for creating or editing a launchd agent
+
+require './init-lib.pl';
+$access{'bootup'} || &error($text{'edit_ecannot'});
+&ReadParse();
+
+if ($in{'new'}) {
+	&ui_print_header(undef, $text{'launchd_title1'}, "");
+	$u = { };
+	}
+else {
+	&ui_print_header(undef, $text{'launchd_title2'}, "");
+	@systemds = &list_launchd_agents();
+	($u) = grep { $_->{'name'} eq $in{'name'} } @systemds;
+	$u || &error($text{'launchd_egone'});
+	}
+
+print &ui_form_start("save_launchd.cgi", "post");
+print &ui_hidden("new", $in{'new'});
+print &ui_hidden("name", $in{'name'}) if (!$in{'new'});
+print &ui_table_start($text{'launchd_header'}, undef, 2);
+
+if ($in{'new'}) {
+	# Service name
+	print &ui_table_row($text{'launchd_name'},
+			    &ui_textbox("name", undef, 30));
+
+	# Server command and args
+	print &ui_table_row($text{'launchd_start'},
+			    &ui_textarea("atstart", undef, 5, 80));
+
+	# Start at boot?
+	print &ui_table_row($text{'upstart_boot'},
+			    &ui_yesno_radio("boot", 1));
+	}
+else {
+	# Service name (non-editable)
+	print &ui_table_row($text{'launchd_name'},
+			    "<tt>$in{'name'}</tt>");
+
+	# Config file location
+	print &ui_table_row($text{'launchd_file'},
+			    $u->{'file'} ? "<tt>$u->{'file'}</tt>"
+					 : "<i>$text{'launchd_nofile'}</i>");
+
+	if ($u->{'file'}) {
+		# Config file contents
+		$conf = &read_file_contents($u->{'file'});
+		print &ui_table_row($text{'launchd_conf'},
+				    &ui_textarea("conf", $conf, 20, 80));
+		}
+
+	# Current status
+	print &ui_table_row($text{'launchd_status'},
+		$u->{'status'} && $u->{'pid'} ?
+			&text('systemd_status1', $u->{'pid'}) :
+		$u->{'status'} ?
+			$text{'systemd_status2'} :
+			$text{'systemd_status0'});
+	}
+
+print &ui_table_end();
+if ($in{'new'}) {
+	print &ui_form_end([ [ undef, $text{'create'} ] ]);
+	}
+else {
+	print &ui_form_end([ [ undef, $text{'save'} ],
+			     [ 'start', $text{'edit_startnow'} ],
+			     [ 'restart', $text{'edit_restartnow'} ],
+			     [ 'stop', $text{'edit_stopnow'} ],
+			     [ 'reload', $text{'edit_reloadnow2'} ],
+			     [ 'delete', $text{'delete'} ] ]);
+	}
+
+&ui_print_footer("", $text{'index_return'});
+

init/edit_rc.cgi

@@ -0,0 +1,69 @@
+#!/usr/local/bin/perl
+# Show a form for editing or creating a BSD rc script
+
+require './init-lib.pl';
+&ReadParse();
+$access{'bootup'} || &error($text{'edit_ecannot'});
+
+if ($in{'new'}) {
+	&ui_print_header(undef, $text{'create_title'}, "");
+	$rc = { 'enabled' => 1 };
+	}
+else {
+	&ui_print_header(undef, $text{'edit_title'}, "");
+	@rcs = &list_rc_scripts();
+	($rc) = grep { $_->{'name'} eq $in{'name'} } @rcs;
+	$rc || &error($text{'edit_egone'});
+	}
+
+print &ui_form_start("save_rc.cgi", "post");
+print &ui_hidden("new", $in{'new'});
+print &ui_table_start($text{'edit_details'}, "width=100%", 2);
+
+if ($in{'new'}) {
+	# When creating, show start/stop/status input fields
+	print &ui_table_row($text{'edit_name'},
+		&ui_textbox("name", undef, 20));
+
+	print &ui_table_row($text{'edit_startcmd'},
+		&ui_textbox("start_cmd", undef, 70));
+
+	print &ui_table_row($text{'edit_stopcmd'},
+		&ui_textbox("stop_cmd", undef, 70));
+
+	print &ui_table_row($text{'edit_statuscmd'},
+		&ui_textbox("status_cmd", undef, 70));
+	}
+else {
+	# Just show fill action file contents
+	print &ui_table_row($text{'edit_name'}, "<tt>$in{'name'}</tt>");
+	print &ui_hidden("name", $in{'name'});
+
+	$script = &read_file_contents($rc->{'file'});
+	print &ui_table_row($text{'edit_script'},
+		&ui_textarea("script", $script, 20, 70));
+	}
+
+# Enabled at boot option
+if ($rc->{'enabled'} != 2) {
+	print &ui_table_row($text{'edit_boot'},
+		&ui_yesno_radio("enabled", int($rc->{'enabled'})));
+	}
+
+print &ui_table_end();
+if ($in{'new'}) {
+	print &ui_form_end([ [ "create", $text{'create'} ] ]);
+	}
+else {
+	print &ui_form_end([ [ "save", $text{'save'} ],
+			     undef,
+			     [ "start", $text{'edit_startnow'} ],
+			     $rc->{'startstop'} ? 
+			        ( [ "stop", $text{'edit_stopnow'} ] ) : ( ),
+			     undef,
+			     $rc->{'standard'} ?
+				( ) : ( [ "delete", $text{'delete'} ] ) ]);
+	}
+
+&ui_print_footer("", $text{'index_return'});
+

init/edit_systemd.cgi

@@ -0,0 +1,88 @@
+#!/usr/local/bin/perl
+# Show a form for creating or editing a systemd action
+
+require './init-lib.pl';
+$access{'bootup'} || &error($text{'edit_ecannot'});
+&ReadParse();
+
+if ($in{'new'}) {
+	&ui_print_header(undef, $text{'systemd_title1'}, "");
+	$u = { };
+	}
+else {
+	&ui_print_header(undef, $text{'systemd_title2'}, "");
+	@systemds = &list_systemd_services();
+	($u) = grep { $_->{'name'} eq $in{'name'} } @systemds;
+	$u || &error($text{'systemd_egone'});
+	$u->{'legacy'} && &error($text{'systemd_elegacy'});
+	}
+
+print &ui_form_start("save_systemd.cgi", "post");
+print &ui_hidden("new", $in{'new'});
+print &ui_hidden("name", $in{'name'}) if (!$in{'new'});
+print &ui_table_start($text{'systemd_header'}, undef, 2);
+
+if ($in{'new'}) {
+	# Service name
+	print &ui_table_row($text{'systemd_name'},
+			    &ui_textbox("name", undef, 30)."<tt>.service</tt>");
+
+	# Description
+	print &ui_table_row($text{'systemd_desc'},
+			    &ui_textbox("desc", undef, 60));
+
+	# Start script
+	print &ui_table_row($text{'systemd_start'},
+			    &ui_textarea("atstart", undef, 5, 80));
+
+	# Stop script
+	print &ui_table_row($text{'systemd_stop'},
+			    &ui_textarea("atstop", undef, 5, 80));
+
+	# Start at boot?
+	print &ui_table_row($text{'systemd_boot'},
+			    &ui_yesno_radio("boot", 1));
+	}
+else {
+	# Service name (non-editable)
+	print &ui_table_row($text{'systemd_name'},
+			    "<tt>$in{'name'}</tt>");
+
+	# Config file and contents
+	print &ui_table_row($text{'systemd_file'},
+			    "<tt>$u->{'file'}</tt>");
+
+	$conf = &read_file_contents($u->{'file'});
+	print &ui_table_row($text{'systemd_conf'},
+			    &ui_textarea("conf", $conf, 20, 80));
+
+	# Current status
+	if ($u->{'boot'} != 2) {
+		print &ui_table_row($text{'systemd_boot'},
+			    &ui_yesno_radio("boot", $u->{'boot'}));
+		}
+	print &ui_table_row($text{'systemd_status'},
+		$u->{'status'} == 1 && $u->{'pid'} ?
+			&text('systemd_status1', $u->{'pid'}) :
+		$u->{'status'} == 1 ?
+			$text{'systemd_status2'} :
+		$u->{'status'} == 0 ?
+			$text{'systemd_status0'} :
+			$text{'systemd_status3'});
+	}
+
+print &ui_table_end();
+if ($in{'new'}) {
+	print &ui_form_end([ [ undef, $text{'create'} ] ]);
+	}
+else {
+	print &ui_form_end([ [ undef, $text{'save'} ],
+			     [ 'start', $text{'edit_startnow'} ],
+			     [ 'restart', $text{'edit_restartnow'} ],
+			     [ 'stop', $text{'edit_stopnow'} ],
+			     $in{'name'} eq 'webmin.service' ?
+			       undef : [ 'delete', $text{'delete'} ] ]);
+	}
+
+&ui_print_footer("", $text{'index_return'});
+

init/edit_upstart.cgi

@@ -0,0 +1,82 @@
+#!/usr/local/bin/perl
+# Show a form for creating or editing an upstart action
+
+require './init-lib.pl';
+$access{'bootup'} || &error($text{'edit_ecannot'});
+&ReadParse();
+
+if ($in{'new'}) {
+	&ui_print_header(undef, $text{'upstart_title1'}, "");
+	$u = { };
+	}
+else {
+	&ui_print_header(undef, $text{'upstart_title2'}, "");
+	@upstarts = &list_upstart_services();
+	($u) = grep { $_->{'name'} eq $in{'name'} } @upstarts;
+	$u || &error($text{'upstart_egone'});
+	$u->{'legacy'} && &error($text{'upstart_elegacy'});
+	}
+
+print &ui_form_start("save_upstart.cgi", "post");
+print &ui_hidden("new", $in{'new'});
+print &ui_hidden("name", $in{'name'}) if (!$in{'new'});
+print &ui_table_start($text{'upstart_header'}, undef, 2);
+
+if ($in{'new'}) {
+	# Service name
+	print &ui_table_row($text{'upstart_name'},
+			    &ui_textbox("name", undef, 30));
+
+	# Description
+	print &ui_table_row($text{'upstart_desc'},
+			    &ui_textbox("desc", undef, 60));
+
+	# Pre-start script
+	print &ui_table_row($text{'upstart_prestart'},
+			    &ui_textarea("prestart", undef, 5, 80));
+
+	# Server command
+	print &ui_table_row($text{'upstart_server'},
+			    &ui_textbox("server", undef, 60)."<br>\n".
+			    &ui_checkbox("fork", 1, $text{'upstart_fork'}, 0));
+
+	# Start at boot?
+	print &ui_table_row($text{'upstart_boot'},
+			    &ui_yesno_radio("boot", 1));
+	}
+else {
+	# Service name (non-editable)
+	print &ui_table_row($text{'upstart_name'},
+			    "<tt>$in{'name'}</tt>");
+
+	# Config file
+	$cfile = "/etc/init/$in{'name'}.conf";
+	$conf = &read_file_contents($cfile);
+	print &ui_table_row($text{'upstart_conf'},
+			    &ui_textarea("conf", $conf, 20, 80));
+
+	# Current status
+	if ($u->{'boot'} eq 'start' || $u->{'boot'} eq 'stop') {
+		print &ui_table_row($text{'upstart_boot'},
+			    &ui_yesno_radio("boot", $u->{'boot'} eq 'start'));
+		}
+	if ($u->{'status'} eq 'waiting' || $u->{'status'} eq 'running') {
+		print &ui_table_row($text{'upstart_status'},
+			$u->{'status'} eq 'waiting' ? $text{'upstart_status0'} :
+				&text('upstart_status1', $u->{'pid'}));
+		}
+	}
+
+print &ui_table_end();
+if ($in{'new'}) {
+	print &ui_form_end([ [ undef, $text{'create'} ] ]);
+	}
+else {
+	print &ui_form_end([ [ undef, $text{'save'} ],
+			     [ 'start', $text{'edit_startnow'} ],
+			     [ 'stop', $text{'edit_stopnow'} ],
+			     [ 'delete', $text{'delete'} ] ]);
+	}
+
+&ui_print_footer("", $text{'index_return'});
+

init/fix_action.cgi

@@ -0,0 +1,22 @@
+#!/usr/local/bin/perl
+# fix_action.cgi
+# Convert an action from a run-level file to a proper action in init.d
+
+require './init-lib.pl';
+$access{'bootup'} == 1 || &error("You are not allowed to edit bootup actions");
+$rl = $ARGV[0];
+$ss = $ARGV[1];
+$num = $ARGV[2];
+$ac = $ARGV[3];
+
+$oldfile = &runlevel_filename($rl, $ss, $num, $ac);
+$newfile = &action_filename($ac);
+while(-r $newfile) {
+	if ($ac =~ /^(.*)_([0-9]+)$/) { $ac = "$1_".($2+1); }
+	else { $ac = $ac."_1"; }
+	$newfile = &action_filename($ac);
+	}
+`mv $oldfile $newfile`;
+&add_rl_action($ac, $rl, $ss, $num);
+&redirect("edit_action.cgi?0+$ac");
+

init/help/help.ar.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff style=";text-align:right;direction:rtl"><h1 style=";text-align:right;direction:rtl"> لم يتم الانتهاء من المساعدة لهذه الوحدة حتى الان </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">ارجع إلى الوحدة</a> <p style=";text-align:right;direction:rtl">

init/help/help.bg.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Помощ за този модул все още не е направена </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Върнете се към модула</a> <p>

init/help/help.ca.html

@@ -0,0 +1,8 @@
+<body bgcolor=#ffffff>
+<h1>L'ajuda d'aquest mòdul encara no està feta</h1>
+
+<hr>
+<a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>
+&nbsp;&nbsp;<a href="">Torna al mòdul</a><p>
+ 
+

init/help/help.cs.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Nápověda k tomuto modulu není dosud dokončena </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Návrat do modulu</a> <p>

init/help/help.da.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Hjælp til dette modul er ikke færdig endnu </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Vend tilbage til modulet</a> <p>

init/help/help.de.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1>Die Hilfe für dieses Modul ist noch nicht abgeschlossen</h1><hr><a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>&nbsp;&nbsp;<a href="">Zurück zum Modul</a><p>

init/help/help.el.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Η βοήθεια για αυτήν την ενότητα δεν έχει ολοκληρωθεί ακόμη </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Επιστροφή στη λειτουργική μονάδα</a> <p>

init/help/help.es.html

@@ -0,0 +1,8 @@
+<body bgcolor=#ffffff>
+<h1>Aún no existe ayuda disponible para este módulo</h1>
+
+<hr>
+<a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>
+&nbsp;&nbsp;<a href="">Regresar al módulo</a><p>
+ 
+

init/help/help.eu.html

@@ -0,0 +1,8 @@
+<body bgcolor=#ffffff>
+<h1>Modulu honentzako laguntza oraindik egiteko dago</h1>
+
+<hr>
+<a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>
+&nbsp;&nbsp;<a href="">Itzuli modulura</a><p>
+ 
+

init/help/help.fa.html

@@ -0,0 +1,13 @@
+<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
+<body bgcolor=#ffffff dir="rtl">
+<h1>
+<span lang="AR-SA" dir="RTL" style="font-size: 12.0pt; font-family: Times New Roman">
+هنوز کمکي براي اين پيمانه </span>
+<span lang="FA" dir="RTL" style="font-size: 12.0pt; font-family: Times New Roman">
+تهیه نشده</span><span lang="AR-SA" dir="RTL" style="font-size: 12.0pt; font-family: Times New Roman"> 
+است</span></h1>
+
+<hr>
+<a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>
+&nbsp;&nbsp;<a href="">بازگشت به پیمانه</a><p>
+</body>

init/help/help.fi.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Apua tälle moduulille ei ole vielä tehty </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Palaa moduuliin</a> <p>

init/help/help.fr.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> L&#39;aide pour ce module n&#39;est pas encore terminée </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Retour au module</a> <p>

init/help/help.hr.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Pomoć za ovaj modul još nije dovršena </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Povratak na modul</a> <p>

init/help/help.html

@@ -0,0 +1,8 @@
+<body bgcolor=#ffffff>
+<h1>Help for this module is not done yet</h1>
+
+<hr>
+<a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>
+&nbsp;&nbsp;<a href="">Return to module</a><p>
+ 
+

init/help/help.hu.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> A modul segítségére még nem került sor </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Vissza a modulhoz</a> <p>

init/help/help.it.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> La guida per questo modulo non è ancora stata eseguita </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Ritorna al modulo</a> <p>

init/help/help.ja.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1>このモジュールのヘルプはまだ完了していません</h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">モジュールに戻る</a> <p>

init/help/help.ko.html

@@ -0,0 +1,6 @@
+<body bgcolor=#ffffff>
+<h1>이 모듈에 대한 도움말이 아직 제공되지 않습니다.</h1>
+
+<hr>
+<a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>
+&nbsp;&nbsp;<a href="">모듈로 돌아가기</a><p>

init/help/help.ms.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Bantuan untuk modul ini belum selesai </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Kembali ke modul</a> <p>

init/help/help.nl.html

@@ -0,0 +1,8 @@
+<body bgcolor=#ffffff>
+<h1>Er is nog geen Help voor deze module gemaakt.</h1>
+
+<hr>
+<a href="/"><img alt="<-" align=middle border=0 src=/images/left.gif></a>
+&nbsp;&nbsp;<a href="">Terug naar de module</a><p>
+ 
+

init/help/help.no.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Hjelp for denne modulen er ikke gjort ennå </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Gå tilbake til modul</a> <p>

init/help/help.pl.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Pomoc dla tego modułu jeszcze się nie zakończyła </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Wróć do modułu</a> <p>

init/help/help.pt.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> A ajuda para este módulo ainda não foi concluída </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Retornar ao módulo</a> <p>

init/help/help.pt_BR.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> A ajuda para este módulo ainda não foi concluída </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Retornar ao módulo</a> <p>

init/help/help.ru.auto.html

@@ -0,0 +1 @@
+<body bgcolor=#ffffff><h1> Помощь для этого модуля еще не сделана </h1><hr> <a href="/"><img alt="&lt;-" align=middle border=0 src=/images/left.gif></a> <a href="">Вернуться в модуль</a> <p>