# Copyright (c) 2020 PaddlePaddle Authors. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. # You may obtain a copy of the License at # # http://www.apache.org/licenses/LICENSE-2.0 # # Unless required by applicable law or agreed to in writing, software # distributed under the License is distributed on an "AS IS" BASIS, # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. # See the License for the specific language governing permissions and # limitations under the License. from __future__ import annotations from typing import TYPE_CHECKING, Any, TypeVar, overload import paddle from paddle import in_dynamic_mode from paddle.utils.decorator_utils import ( ParamAliasDecorator, param_one_alias, param_two_alias, ) from .. import functional as F from .layers import Layer if TYPE_CHECKING: from collections.abc import Sequence from paddle import Tensor from paddle._typing import ( DataLayout1D, DataLayout1DVariant, DataLayout2D, DataLayout3D, DTypeLike, ParamAttrLike, PlaceLike, ShapeLike, Size2, Size4, ) from ..functional.common import ( _DropoutMode, _InterpolateMode, _PaddingTensorMode, ) _T_Padding = TypeVar("_T_Padding", Tensor, Sequence[int]) from paddle.utils.decorator_utils import ForbidKeywordsDecorator __all__ = [] @overload def _npairs(x: _T_Padding, n: int) -> _T_Padding: ... @overload def _npairs(x: int, n: int) -> list[int]: ... def _npairs(x, n): if isinstance(x, (paddle.Tensor, list, tuple)): return x x = [x] * (n * 2) return x class Identity(Layer): r""" A placeholder identity operator that is argument-insensitive. For each input :math:`X` , the output :math:`Out` is: .. math:: Out = X Parameters: args: any argument (unused) kwargs: any keyword argument (unused) Shape: - input: Multi-dimensional tensor with shape :math:`[batch\_size, n1, n2, ...]` . - output: Multi-dimensional tensor with shape :math:`[batch\_size, n1, n2, ...]` . Examples: .. code-block:: pycon >>> import paddle >>> paddle.seed(100) >>> input_tensor = paddle.randn(shape=[3, 2]) >>> layer = paddle.nn.Identity() >>> out = layer(input_tensor) >>> print(input_tensor) Tensor(shape=[3, 2], dtype=float32, place=Place(cpu), stop_gradient=True, [[-1.41661501, 0.25904641], [ 0.00979547, -0.30324230], [-1.34256756, -0.76540256]]) >>> print(out) Tensor(shape=[3, 2], dtype=float32, place=Place(cpu), stop_gradient=True, [[-1.41661501, 0.25904641], [ 0.00979547, -0.30324230], [-1.34256756, -0.76540256]]) """ def __init__(self, *args: Any, **kwargs: Any) -> None: super().__init__() def forward(self, input: Tensor) -> Tensor: return input class Linear(Layer): r""" Fully-connected linear transformation layer. For each input :math:`X` , the equation is: .. math:: Out = XW + b where :math:`W` is the weight and :math:`b` is the bias. Linear layer takes only one multi-dimensional tensor as input with the shape :math:`[batch\_size, *, in\_features]` , where :math:`*` means any number of additional dimensions. It multiplies input tensor with the weight (a 2-D tensor of shape :math:`[in\_features, out\_features]` ) and produces an output tensor of shape :math:`[batch\_size, *, out\_features]` . If :math:`bias\_attr` is not False, the bias (a 1-D tensor of shape :math:`[out\_features]` ) will be created and added to the output. Parameters: in_features (int): The number of input units. out_features (int): The number of output units. weight_attr (ParamAttr|None, optional): The attribute for the learnable weight of this layer. The default value is None. If the Initializer of the param_attr is not set, the parameter is initialized with Xavier. For detailed information, please refer to paddle.ParamAttr. bias_attr (ParamAttr|bool|None, optional): The attribute for the learnable bias of this layer. If it is set to False, no bias will be added to the output. If it is set to None or one kind of ParamAttr, a bias parameter will be created according to ParamAttr. For detailed information, please refer to paddle.ParamAttr. The default value is None and the bias will be initialized to zero. name (str|None, optional): Normally there is no need for user to set this parameter. For detailed information, please refer to :ref:`api_guide_Name` . Attribute: **weight** (Parameter): the learnable weight of this layer. **bias** (Parameter): the learnable bias of this layer. Shape: - input: Multi-dimensional tensor with shape :math:`[batch\_size, *, in\_features]` . Its data types are float16, float32, float64 ,The default is float32 . - output: Multi-dimensional tensor with shape :math:`[batch\_size, *, out\_features]` . The data type is the same as the input . Examples: .. code-block:: pycon >>> import paddle >>> paddle.seed(100) >>> # Define the linear layer. >>> weight_attr = paddle.ParamAttr( ... name="weight", ... initializer=paddle.nn.initializer.Constant(value=0.5), ... ) >>> bias_attr = paddle.ParamAttr( ... name="bias", ... initializer=paddle.nn.initializer.Constant(value=1.0), ... ) >>> linear = paddle.nn.Linear(2, 4, weight_attr=weight_attr, bias_attr=bias_attr) >>> print(linear.weight) Parameter containing: Tensor(shape=[2, 4], dtype=float32, place=Place(cpu), stop_gradient=False, [[0.50000000, 0.50000000, 0.50000000, 0.50000000], [0.50000000, 0.50000000, 0.50000000, 0.50000000]]) >>> print(linear.bias) Parameter containing: Tensor(shape=[4], dtype=float32, place=Place(cpu), stop_gradient=False, [1., 1., 1., 1.]) >>> x = paddle.randn((3, 2), dtype="float32") >>> y = linear(x) >>> print(y) Tensor(shape=[3, 4], dtype=float32, place=Place(cpu), stop_gradient=False, [[ 0.42121571, 0.42121571, 0.42121571, 0.42121571], [ 0.85327661, 0.85327661, 0.85327661, 0.85327661], [-0.05398512, -0.05398512, -0.05398512, -0.05398512]]) """ weight: Tensor bias: Tensor name: str | None @ForbidKeywordsDecorator( illegal_keys={"bias", "device", "dtype"}, func_name="paddle.nn.Linear", correct_name="paddle.compat.nn.Linear", url_suffix="torch.nn.Linear", ) def __init__( self, in_features: int, out_features: int, weight_attr: ParamAttrLike | None = None, bias_attr: ParamAttrLike | None = None, name: str | None = None, ) -> None: super().__init__() self._dtype = self._helper.get_default_dtype() self._weight_attr = weight_attr self._bias_attr = bias_attr self.weight = self.create_parameter( shape=[in_features, out_features], attr=self._weight_attr, dtype=self._dtype, is_bias=False, ) self.bias = self.create_parameter( shape=[out_features], attr=self._bias_attr, dtype=self._dtype, is_bias=True, ) self.name = name def forward(self, input: Tensor) -> Tensor: out = F.linear( x=input, weight=self.weight, bias=self.bias, name=self.name ) return out def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'in_features={self.weight.shape[0]}, out_features={self.weight.shape[1]}, dtype={self._dtype}{name_str}' class Upsample(Layer): """ This op resizes a batch of images. The input must be a 3-D Tensor of the shape (num_batches, channels, in_w) or (num_batches, in_w, channels), or 4-D (num_batches, channels, in_h, in_w) or (num_batches, in_h, in_w, channels), or a 5-D Tensor of the shape (num_batches, channels, in_d, in_h, in_w) or (num_batches, in_d, in_h, in_w, channels), Where in_w is width of the input tensor, in_h is the height of the input tensor, in_d is the depth of the input tensor. and the resizing only applies on the three dimensions(depth, height and width). Supporting resample methods: 'linear' : Linear interpolation 'bilinear' : Bilinear interpolation 'trilinear' : Trilinear interpolation 'nearest' : Nearest neighbor interpolation 'bicubic' : Bicubic interpolation 'area' : Area interpolation Linear interpolation is the method of using a line connecting two known quantities to determine the value of an unknown quantity between the two known quantities. Nearest neighbor interpolation is to perform nearest neighbor interpolation in both the 3rd dimension(in height direction) and the 4th dimension(in width direction) on input tensor. Bilinear interpolation is an extension of linear interpolation for interpolating functions of two variables (e.g. H-direction and W-direction in this op) on a rectilinear 2D grid. The key idea is to perform linear interpolation first in one direction, and then again in the other direction. Bicubic interpolation is an extension of cubic interpolation for interpolating data points on a two-dimensional regular grid. The interpolated surface is smoother than corresponding surfaces obtained by bilinear interpolation or nearest-neighbor interpolation. Trilinear interpolation is an extension of linear interpolation for interpolating functions of three variables (e.g. D-direction, H-direction and W-direction in this op) on a rectilinear 3D grid. The linear interpolation is performed on three directions. align_corners and align_mode are optional parameters,the calculation method of interpolation can be selected by them. Area interpolation is to perform area interpolation in both the 3rd dimension(in height direction) , the 4th dimension(in width direction) and the 5th dimension(in depth direction) on input tensor. Set to area will directly call `paddle.nn.functional.adaptive_avg_pool1d` or `paddle.nn.functional.adaptive_avg_pool2d` or `paddle.nn.functional.adaptive_avg_pool3d`. Example: .. code-block:: text For scale_factor: if align_corners = True && out_size > 1 : scale_factor = (in_size-1.0)/(out_size-1.0) else: scale_factor = float(in_size/out_size) Linear interpolation: if: align_corners = False , align_mode = 0 input : (N,C,W_in) output: (N,C,W_out) where: W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,W_in) output: (N,C,W_out) where: W_out = W_{in} * scale_{factor} Nearest neighbor interpolation: if: align_corners = False input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = floor (H_{in} * scale_{factor}) W_out = floor (W_{in} * scale_{factor}) else: align_corners = True input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = round(H_{in} * scale_{factor}) W_out = round(W_{in} * scale_{factor}) Bilinear interpolation: if: align_corners = False , align_mode = 0 input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = (H_{in}+0.5) * scale_{factor} - 0.5 W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = H_{in} * scale_{factor} W_out = W_{in} * scale_{factor} Bicubic interpolation: if: align_corners = False input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = (H_{in}+0.5) * scale_{factor} - 0.5 W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,H_in,W_in) output: (N,C,H_out,W_out) where: H_out = H_{in} * scale_{factor} W_out = W_{in} * scale_{factor} Trilinear interpolation: if: align_corners = False , align_mode = 0 input : (N,C,D_in,H_in,W_in) output: (N,C,D_out,H_out,W_out) where: D_out = (D_{in}+0.5) * scale_{factor} - 0.5 H_out = (H_{in}+0.5) * scale_{factor} - 0.5 W_out = (W_{in}+0.5) * scale_{factor} - 0.5 else: input : (N,C,D_in,H_in,W_in) output: (N,C,D_out,H_out,W_out) where: D_out = D_{in} * scale_{factor} H_out = H_{in} * scale_{factor} W_out = W_{in} * scale_{factor} https://en.wikipedia.org/wiki/Linear_interpolation. For details of linear interpolation, please refer to Wikipedia: For details of nearest neighbor interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Nearest-neighbor_interpolation. For details of bilinear interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Bilinear_interpolation. For details of bicubic interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Bicubic_interpolation For details of trilinear interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Trilinear_interpolation. Parameters: size (list|tuple|Tensor|None): Output shape of image resize layer, the shape is (out_w, ) when input is a 3-D Tensor, the shape is (out_h, out_w) when input is a 4-D Tensor and is (out_d, out_h, out_w) when input is a 5-D Tensor. Default: None. If a list/tuple, each element can be an integer or a Tensor of shape: [1]. If a Tensor , its dimensions size should be a 1. scale_factor (float|Tensor|list|tuple|None): The multiplier for the input height or width. At least one of :attr:`size` or :attr:`scale_factor` must be set. And :attr:`size` has a higher priority than :attr:`scale_factor`. Has to match input size if it is either a list or a tuple or a Tensor. Default: None. mode (str): The resample method. It supports 'linear', 'nearest', 'bilinear', 'area', 'bicubic' and 'trilinear' currently. Default: 'nearest' align_corners(bool) : An optional bool, If True, the centers of the 4 corner pixels of the input and output tensors are aligned, preserving the values at the corner pixels. Default: False align_mode(int) : An optional for linear/bilinear/trilinear interpolation. Refer to the formula in the example above, it can be \'0\' for src_idx = scale_factor*(dst_index+0.5)-0.5 , can be \'1\' for src_idx = scale_factor*dst_index. data_format (str|None, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from:`"NCW"`, `"NWC"`, `"NCHW"`, `"NHWC"`, `"NCDHW"`, `"NDHWC"`. The default value is None. When :attr:`data_format` is not specified, it will be automatically inferred from the input dimension of :attr:`x`. When :attr:`x` is a 3-D Tensor, :attr:`data_format` will be set to `"NCW"`; When :attr:`x` is a 4-D Tensor, :attr:`data_format` will be set to `"NCHW"`; When :attr:`x` is a 5-D Tensor, :attr:`data_format` will be set to `"NCDHW"`. When it is `"NCHW"`, the data should be stored in the order of: `[batch_size, input_channels, input_height, input_width]`. When it is `"NCDHW"`, the data should be stored in the order of: `[batch_size, input_channels, input_depth, input_height, input_width]`. recompute_scale_factor (bool, optional): Whether to recompute the scaling factor for interpolation calculation. When set to `True`, the `scale_factor` parameter must be provided, and the function will use it along with the input tensor shape to calculate the output tensor shape, then recalculate the scaling factor based on the output and input tensor shapes. This parameter is particularly useful when `scale_factor` is a floating-point value. When set to `False`, either `size` or `scale_factor` will be used directly for interpolation without recalculation. Default: None. name(str|None, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: A callable object of Upsample. Examples: .. code-block:: pycon >>> import paddle >>> input = paddle.rand([2, 3, 6, 10], dtype="float32") >>> upsample_out = paddle.nn.Upsample(size=[12, 12]) >>> output = upsample_out(x=input) >>> print(output.shape) paddle.Size([2, 3, 12, 12]) """ size: ShapeLike | None scale_factor: ShapeLike | float | None mode: _InterpolateMode align_corners: bool align_mode: int data_format: DataLayout1DVariant | DataLayout2D | DataLayout3D | None recompute_scale_factor: bool | None name: str | None def __init__( self, size: ShapeLike | None = None, scale_factor: ShapeLike | float | None = None, mode: _InterpolateMode = 'nearest', align_corners: bool = False, align_mode: int = 0, data_format: ( DataLayout1DVariant | DataLayout2D | DataLayout3D | None ) = None, recompute_scale_factor: bool | None = None, name: str | None = None, ) -> None: super().__init__() self.size = size self.scale_factor = scale_factor self.mode = mode.lower() self.align_corners = align_corners self.align_mode = align_mode self.data_format = data_format self.recompute_scale_factor = recompute_scale_factor self.name = name def forward(self, x: Tensor) -> Tensor: if self.data_format is None: dim_size = len(x.shape) if dim_size == 3: self.data_format = 'NCW' elif dim_size == 4: self.data_format = 'NCHW' elif dim_size == 5: self.data_format = 'NCDHW' else: raise ValueError( f"The dimension of the input tensor should only be 3-D, 4-D or 5-D, but the received dimension is {dim_size}." ) out = F.interpolate( x, size=self.size, scale_factor=self.scale_factor, mode=self.mode, align_corners=self.align_corners, align_mode=self.align_mode, data_format=self.data_format, recompute_scale_factor=self.recompute_scale_factor, name=self.name, ) return out def extra_repr(self) -> str: if self.scale_factor is not None: main_str = f'scale_factor={self.scale_factor}' else: main_str = f'size={self.size}' name_str = f', name={self.name}' if self.name else '' return f'{main_str}, mode={self.mode}, align_corners={self.align_corners}, align_mode={self.align_mode}, data_format={self.data_format}{name_str}' class UpsamplingNearest2D(Layer): """ This op upsamples a batch of images, using nearest neighbours' pixel values. The input must be a 4-D Tensor of the shape (num_batches, channels, in_h, in_w), where in_w is width of the input tensor, in_h is the height of the input tensor. And the upsampling only applies on the two dimensions(height and width). Nearest neighbor interpolation is to perform nearest neighbor interpolation in both the 3rd dimension(in height direction) and the 4th dimension(in width direction) on input tensor. For details of nearest neighbor interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Nearest-neighbor_interpolation. Parameters: x (Tensor): 4-D Tensor, its data type is float32, float64, or uint8, its data format is specified by :attr:`data_format`. size (int|list|tuple|Tensor|None): Output shape of image resize layer, the shape is (out_h, out_w) when input is a 4-D Tensor. Default: None. If an int value, the `out_h` and `out_w` will be set as the number. If a list/tuple, each element can be an integer or a Tensor of shape: [1]. If a Tensor, its dimensions size should be a 1. scale_factor (float|int|list|tuple|Tensor|None): The multiplier for the input height or width. At least one of :attr:`size` or :attr:`scale_factor` must be set. And :attr:`size` has a higher priority than :attr:`scale_factor`. Has to match input size if it is either a list or a tuple or a Tensor. Default: None. data_format (str, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from:`NCW`, `NWC`, `"NCHW"`, `"NHWC"`, `"NCDHW"`, `"NDHWC"`. The default is `"NCHW"`. When it is `"NCHW"`, the data is stored in the order of: `[batch_size, input_channels, input_height, input_width]`. When it is `"NCHW"`, the data is stored in the order of: `[batch_size, input_channels, input_depth, input_height, input_width]`. name(str|None, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: A 4-D Tensor of the shape (num_batches, channels, out_h, out_w) or (num_batches, out_h, out_w, channels), Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_data = paddle.rand(shape=(2, 3, 6, 10)).astype("float32") >>> upsample_out = paddle.nn.UpsamplingNearest2D(size=[12, 12]) >>> input = paddle.to_tensor(input_data) >>> output = upsample_out(x=input) >>> print(output.shape) paddle.Size([2, 3, 12, 12]) """ size: ShapeLike | None scale_factor: ShapeLike | float | None data_format: DataLayout1DVariant | DataLayout2D | DataLayout3D name: str | None def __init__( self, size: ShapeLike | None = None, scale_factor: ShapeLike | float | None = None, data_format: DataLayout1DVariant | DataLayout2D | DataLayout3D = 'NCHW', name: str | None = None, ) -> None: super().__init__() if isinstance(size, int): size = [size, size] self.size = size self.scale_factor = scale_factor self.data_format = data_format self.name = name @param_one_alias(["x", "input"]) def forward(self, x: Tensor) -> Tensor: out = F.interpolate( x, size=self.size, scale_factor=self.scale_factor, mode='nearest', align_corners=False, align_mode=0, data_format=self.data_format, name=self.name, ) return out def extra_repr(self) -> str: if self.scale_factor is not None: main_str = f'scale_factor={self.scale_factor}' else: main_str = f'size={self.size}' name_str = f', name={self.name}' if self.name else '' return f'{main_str}, data_format={self.data_format}{name_str}' class UpsamplingBilinear2D(Layer): """ This op upsamples a batch of images, using bilinear' pixel values. The input must be a 4-D Tensor of the shape (num_batches, channels, in_h, in_w), where in_w is width of the input tensor, in_h is the height of the input tensor. And the upsampling only applies on the two dimensions(height and width). Bilinear interpolation is an extension of linear interpolation for interpolating functions of two variables (e.g. H-direction and W-direction in this op) on a rectilinear 2D grid. The key idea is to perform linear interpolation first in one direction, and then again in the other direction. For details of bilinear interpolation, please refer to Wikipedia: https://en.wikipedia.org/wiki/Bilinear_interpolation. Parameters: x (Tensor): 4-D Tensor, its data type is float32, float64, or uint8, its data format is specified by :attr:`data_format`. size (int|list|tuple|Tensor|None): Output shape of image resize layer, the shape is (out_h, out_w) when input is a 4-D Tensor. Default: None. If an int value, the `out_h` and `out_w` will be set as the number. If a list/tuple, each element can be an integer or a Tensor of shape: [1]. If a Tensor , its dimensions size should be a 1. scale_factor (float|int|list|tuple|Tensor|None): The multiplier for the input height or width. At least one of :attr:`size` or :attr:`scale_factor` must be set. And :attr:`size` has a higher priority than :attr:`scale_factor`. Has to match input size if it is either a list or a tuple or a Tensor. Default: None. data_format (str, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from:`NCW`, `NWC`, `"NCHW"`, `"NHWC"`, `"NCDHW"`, `"NDHWC"`. The default is `"NCHW"`. When it is `"NCHW"`, the data is stored in the order of: `[batch_size, input_channels, input_height, input_width]`. When it is `"NCHW"`, the data is stored in the order of: `[batch_size, input_channels, input_depth, input_height, input_width]`. name(str|None, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: A 4-D Tensor of the shape (num_batches, channels, out_h, out_w) or (num_batches, out_h, out_w, channels), Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_data = paddle.rand(shape=(2, 3, 6, 10)).astype("float32") >>> upsample_out = paddle.nn.UpsamplingBilinear2D(size=[12, 12]) >>> input = paddle.to_tensor(input_data) >>> output = upsample_out(x=input) >>> print(output.shape) paddle.Size([2, 3, 12, 12]) """ size: ShapeLike | None scale_factor: ShapeLike | float data_format: DataLayout1DVariant | DataLayout2D | DataLayout3D name: str | None def __init__( self, size: ShapeLike | None = None, scale_factor: ShapeLike | float = None, data_format: DataLayout1DVariant | DataLayout2D | DataLayout3D = 'NCHW', name: str | None = None, ) -> None: super().__init__() if isinstance(size, int): size = [size, size] self.size = size self.scale_factor = scale_factor self.data_format = data_format self.name = name @param_one_alias(["x", "input"]) def forward(self, x: Tensor) -> Tensor: out = F.interpolate( x, size=self.size, scale_factor=self.scale_factor, mode='bilinear', align_corners=True, align_mode=0, data_format=self.data_format, name=self.name, ) return out def extra_repr(self) -> str: if self.scale_factor is not None: main_str = f'scale_factor={self.scale_factor}' else: main_str = f'size={self.size}' name_str = f', name={self.name}' if self.name else '' return f'{main_str}, data_format={self.data_format}{name_str}' class Bilinear(Layer): r""" This layer performs bilinear on two inputs. .. math:: out_{i} = x1 * W_{i} * {x2^\mathrm{T}}, i=0,1,...,out_features-1 out = out + b In this formula: - :math:`x1`: the first input contains in1_features elements, shape is [batch_size, in1_features]. - :math:`x2`: the second input contains in2_features elements, shape is [batch_size, in2_features]. - :math:`W_{i}`: the i-th learned weight, shape is [in1_features, in2_features], and learned weight's shape is [out_features, in1_features, in2_features]. - :math:`out_{i}`: the i-th element of out, shape is [batch_size], and out's shape is [batch_size, out_features]. - :math:`b`: the learned bias, shape is [1, out_features]. - :math:`x2^\mathrm{T}`: the transpose of :math:`x2`. Parameters: in1_features (int): The dimension of each first input(`x1`). in2_features (int): The dimension of each second input(`x2`). out_features (int): The dimension of output of this layer. weight_attr (ParamAttr|None, optional): The parameter attribute for the learnable w, parameters/weights of this layer. The default value is None. bias_attr (ParamAttr|bool|None, optional): The parameter attribute for the bias of this layer. If it is set to False, no bias will be added to the output units. If it is set to None, the bias is initialized zero. The default value is None. name (str|None, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Default: None. Attribute: **weight** (Parameter): the learnable weights of this layer. **bias** (Parameter): the learnable bias of this layer. Returns: Tensor: A 2-D Tensor of shape [batch_size, out_features]. Examples: .. code-block:: pycon >>> import paddle >>> layer1 = paddle.rand((5, 5)).astype('float32') >>> layer2 = paddle.rand((5, 4)).astype('float32') >>> bilinear = paddle.nn.Bilinear(in1_features=5, in2_features=4, out_features=1000) >>> result = bilinear(layer1, layer2) >>> print(result.shape) paddle.Size([5, 1000]) """ weight: Tensor bias: Tensor def __init__( self, in1_features: int, in2_features: int, out_features: int, weight_attr: ParamAttrLike | None = None, bias_attr: ParamAttrLike | None = None, name: str | None = None, ) -> None: super().__init__() self._weight_attr = weight_attr self._bias_attr = bias_attr self._name = name self._in1_features = in1_features self._in2_features = in2_features self._out_features = out_features self._dtype = self._helper.get_default_dtype() weight_shape = [ self._out_features, self._in1_features, self._in2_features, ] self.weight = self.create_parameter( attr=self._weight_attr, shape=weight_shape, dtype=self._dtype, is_bias=False, ) bias_shape = [1, self._out_features] self.bias = self.create_parameter( attr=self._bias_attr, shape=bias_shape, dtype=self._dtype, is_bias=True, ) def forward(self, x1: Tensor, x2: Tensor) -> Tensor: return F.bilinear(x1, x2, self.weight, self.bias, self._name) def extra_repr(self) -> str: name_str = f', name={self._name}' if self._name else '' return f'in1_features={self._in1_features}, in2_features={self._in2_features}, out_features={self._out_features}, dtype={self._dtype}{name_str}' class Dropout(Layer): r""" Dropout is a regularization technique for reducing overfitting by preventing neuron co-adaption during training as described in the paper: `Improving neural networks by preventing co-adaptation of feature detectors `_ The dropout operator randomly sets the outputs of some units to zero, while upscale others according to the given dropout probability. See :ref:`api_paddle_nn_functional_dropout` for more details. In dygraph mode, please use ``eval()`` to switch to evaluation mode, where dropout is disabled. Warning: The corresponding `functional methods` please reference :ref:`api_paddle_nn_functional_dropout`. Parameters: p (float|int, optional): Probability of setting units to zero. Default: 0.5 inplace (bool, optional): If set to ``True``, will do this operation in-place. Default: ``False`` axis (int|list|tuple|None, optional): The axis along which the dropout is performed. Default: None. mode(str, optional): ['upscale_in_train'(default) | 'downscale_in_infer'] 1. upscale_in_train (default), upscale the output at training time - train: :math:`out = input \times \frac{mask}{(1.0 - p)}` - inference: :math:`out = input` 2. downscale_in_infer, downscale the output at inference - train: :math:`out = input \times mask` - inference: :math:`out = input \times (1.0 - p)` name (str|None, optional): Name for the operation, Default: None. For more information, please refer to :ref:`api_guide_Name`. Shape: - input: N-D tensor. - output: N-D tensor, the same shape as input. Examples: .. code-block:: pycon >>> import paddle >>> paddle.seed(2023) >>> x = paddle.to_tensor([[1, 2, 3], [4, 5, 6]], dtype="float32") >>> m = paddle.nn.Dropout(p=0.5) >>> y_train = m(x) >>> print(y_train) Tensor(shape=[2, 3], dtype=float32, place=Place(cpu), stop_gradient=True, [[2., 4., 0.], [8., 0., 0.]]) >>> m.eval() # switch the model to test phase >>> y_test = m(x) >>> print(y_test) Tensor(shape=[2, 3], dtype=float32, place=Place(cpu), stop_gradient=True, [[1., 2., 3.], [4., 5., 6.]]) """ p: float axis: int | Sequence[int] | None mode: _DropoutMode name: str | None def __init__( self, p: float = 0.5, inplace: bool = False, axis: int | Sequence[int] | None = None, mode: _DropoutMode = "upscale_in_train", name: str | None = None, ) -> None: super().__init__() self.p = p self.inplace = inplace self.axis = axis self.mode = mode self.name = name def forward(self, input: Tensor) -> Tensor: out = F.dropout( input, p=self.p, axis=self.axis, training=self.training, inplace=self.inplace, mode=self.mode, name=self.name, ) return out def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'p={self.p}, axis={self.axis}, mode={self.mode}{name_str}, inplace={self.inplace}' class Dropout2D(Layer): """ Randomly zero out entire channels (in the batched input 4d tensor with the shape `NCHW` , a channel is a 2D feature map with the shape `HW`). Each channel will be zeroed out independently on every forward call with probability `p` using samples from a Bernoulli distribution. Dropout2D will help promote independence between feature maps as described in the paper: `Efficient Object Localization Using Convolutional Networks `_ See :ref:`api_paddle_nn_functional_dropout2d` for more details. In dygraph mode, please use ``eval()`` to switch to evaluation mode, where dropout is disabled. Parameters: p (float, optional): Probability of setting units to zero. Default: 0.5. data_format (str, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from `NCHW` or `NHWC`. When it is `NCHW`, the data is stored in the order of: [batch_size, input_channels, input_height, input_width]. Default: `NCHW`. name (str|None, optional): Name for the operation, Default: None. For more information, please refer to :ref:`api_guide_Name`. Shape: - input: 4-D tensor. - output: 4-D tensor, the same shape as input. Examples: .. code-block:: pycon >>> import paddle >>> paddle.seed(100) >>> x = paddle.rand([2, 2, 1, 3], dtype="float32") >>> print(x) Tensor(shape=[2, 2, 1, 3], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[0.55355281, 0.20714243, 0.01162981]], [[0.51577556, 0.36369765, 0.26091650]]], [[[0.18905126, 0.56219709, 0.00808361]], [[0.78120756, 0.32112977, 0.90572405]]]]) >>> m = paddle.nn.Dropout2D(p=0.5) >>> y_train = m(x) >>> print(y_train) Tensor(shape=[2, 2, 1, 3], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[1.10710561, 0.41428486, 0.02325963]], [[1.03155112, 0.72739530, 0.52183300]]], [[[0. , 0. , 0. ]], [[0. , 0. , 0. ]]]]) >>> m.eval() # switch the model to test phase >>> y_test = m(x) >>> print(y_test) Tensor(shape=[2, 2, 1, 3], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[0.55355281, 0.20714243, 0.01162981]], [[0.51577556, 0.36369765, 0.26091650]]], [[[0.18905126, 0.56219709, 0.00808361]], [[0.78120756, 0.32112977, 0.90572405]]]]) """ p: float data_format: DataLayout2D name: str | None def __init__( self, p: float = 0.5, data_format: DataLayout2D = 'NCHW', name: str | None = None, ) -> None: super().__init__() self.p = p self.data_format = data_format self.name = name def forward(self, input: Tensor) -> Tensor: out = F.dropout2d( input, p=self.p, training=self.training, data_format=self.data_format, name=self.name, ) return out def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'p={self.p}, data_format={self.data_format}{name_str}' class Dropout3D(Layer): """ Randomly zero out entire channels (in the batched input 5d tensor with the shape `NCDHW` , a channel is a 3D feature map with the shape `DHW` ). Each channel will be zeroed out independently on every forward call with probability `p` using samples from a Bernoulli distribution. Dropout3D will help promote independence between feature maps as described in the paper: `Efficient Object Localization Using Convolutional Networks `_ See :ref:`api_paddle_nn_functional_dropout3d` for more details. In dygraph mode, please use ``eval()`` to switch to evaluation mode, where dropout is disabled. Parameters: p (float|int, optional): Probability of setting units to zero. Default: 0.5. data_format (str, optional): Specify the data format of the input, and the data format of the output will be consistent with that of the input. An optional string from `NCDHW` or `NDHWC`. When it is `NCDHW`, the data is stored in the order of: [batch_size, input_channels, input_depth, input_height, input_width]. Default: `NCDHW`. name (str|None, optional): Name for the operation, Default: None. For more information, please refer to :ref:`api_guide_Name`. Shape: - input: 5-D tensor. - output: 5-D tensor, the same shape as input. Examples: .. code-block:: pycon >>> import paddle >>> x = paddle.arange(24, dtype="float32").reshape((1, 2, 2, 2, 3)) >>> print(x) Tensor(shape=[1, 2, 2, 2, 3], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[0. , 1. , 2. ], [3. , 4. , 5. ]], [[6. , 7. , 8. ], [9. , 10., 11.]]], [[[12., 13., 14.], [15., 16., 17.]], [[18., 19., 20.], [21., 22., 23.]]]]]) >>> m = paddle.nn.Dropout3D(p=0.5) >>> y_train = m(x) >>> m.eval() # switch the model to test phase >>> y_test = m(x) >>> print(y_test) Tensor(shape=[1, 2, 2, 2, 3], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[0. , 1. , 2. ], [3. , 4. , 5. ]], [[6. , 7. , 8. ], [9. , 10., 11.]]], [[[12., 13., 14.], [15., 16., 17.]], [[18., 19., 20.], [21., 22., 23.]]]]]) """ p: float data_format: DataLayout3D name: str | None def __init__( self, p: float = 0.5, data_format: DataLayout3D = 'NCDHW', name: str | None = None, ) -> None: super().__init__() self.p = p self.data_format = data_format self.name = name def forward(self, input: Tensor) -> Tensor: out = F.dropout3d( input, p=self.p, training=self.training, data_format=self.data_format, name=self.name, ) return out def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'p={self.p}, data_format={self.data_format}{name_str}' class AlphaDropout(Layer): """ Alpha Dropout is a type of Dropout that maintains the self-normalizing property. For an input with zero mean and unit standard deviation, the output of Alpha Dropout maintains the original mean and standard deviation of the input. Alpha Dropout fits well to SELU activate function by randomly setting activations to the negative saturation value. For more information, please refer to: `Self-Normalizing Neural Networks `_ In dygraph mode, please use ``eval()`` to switch to evaluation mode, where dropout is disabled. Parameters: p (float|int, optional): Probability of setting units to zero. Default: 0.5 name (str|None, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Shape: - input: N-D tensor. - output: N-D tensor, the same shape as input. Examples: .. code-block:: pycon >>> import paddle >>> paddle.seed(2023) >>> x = paddle.to_tensor([[-1, 1], [-1, 1]], dtype="float32") >>> m = paddle.nn.AlphaDropout(p=0.5) >>> y_train = m(x) >>> print(y_train) Tensor(shape=[2, 2], dtype=float32, place=Place(cpu), stop_gradient=True, [[-0.10721093, 1.66559887], [-0.77919382, 1.66559887]]) >>> m.eval() # switch the model to test phase >>> y_test = m(x) >>> print(y_test) Tensor(shape=[2, 2], dtype=float32, place=Place(cpu), stop_gradient=True, [[-1., 1.], [-1., 1.]]) """ p: float name: str | None def __init__(self, p: float = 0.5, name: str | None = None) -> None: super().__init__() self.p = p self.name = name def forward(self, input: Tensor) -> Tensor: out = F.alpha_dropout( input, p=self.p, training=self.training, name=self.name ) return out def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'p={self.p}{name_str}' class FeatureAlphaDropout(Layer): """ A channel is a feature map, Feature Alpha Dropout randomly masks out entire channels. Alpha Dropout is a type of Dropout that maintains the self-normalizing property. For an input with zero mean and unit standard deviation, the output of Alpha Dropout maintains the original mean and standard deviation of the input. Alpha Dropout fits well to SELU activate function by randomly setting activations to the negative saturation value. For more information, please refer to: `Self-Normalizing Neural Networks `_ In dygraph mode, please use ``eval()`` to switch to evaluation mode, where dropout is disabled. Parameters: p (float | int, optional): Probability of setting units to zero. Default: 0.5 name (str | None, optional): Name for the operation (optional, default is None). For more information, please refer to :ref:`api_guide_Name`. Shape: - input: N-D tensor. - output: N-D tensor, the same shape as input. Examples: .. code-block:: pycon >>> import paddle >>> paddle.seed(2023) >>> x = paddle.to_tensor([[-1, 1], [-1, 1]], dtype="float32") >>> m = paddle.nn.FeatureAlphaDropout(p=0.5) >>> y_train = m(x) >>> print(y_train) Tensor(shape=[2, 2], dtype=float32, place=Place(cpu), stop_gradient=True, [[-0.10721093, 1.66559887], [-0.77919382, 1.66559887]]) >>> m.eval() # switch the model to test phase >>> y_test = m(x) >>> print(y_test) Tensor(shape=[2, 2], dtype=float32, place=Place(cpu), stop_gradient=True, [[-1., 1.], [-1., 1.]]) """ p: float name: str | None def __init__(self, p: float = 0.5, name: str | None = None) -> None: super().__init__() self.p = p self.name = name def forward(self, input: Tensor) -> Tensor: out = F.feature_alpha_dropout( input, p=self.p, training=self.training, name=self.name ) return out def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'p={self.p}{name_str}' class _PadnD(Layer): _n_dim = 1 def __init__( self, padding: Tensor | Sequence[int] | int, mode: _PaddingTensorMode = 'constant', value: float = 0.0, data_format: DataLayout1D | DataLayout2D | DataLayout3D = "NCL", name: str | None = None, ) -> None: super().__init__() self.padding = _npairs(padding, self._n_dim) self._mode: _PaddingTensorMode = mode self.value = value self._data_format: DataLayout1D | DataLayout2D | DataLayout3D = ( data_format ) self._name = name @param_one_alias(["x", "input"]) def forward(self, x: Tensor) -> Tensor: return F.pad( x, pad=self.padding, mode=self._mode, value=self.value, data_format=self._data_format, name=self._name, ) def extra_repr(self) -> str: name_str = f', name={self._name}' if self._name else '' return f'padding={self.padding}, mode={self._mode}, value={self.value}, data_format={self._data_format}{name_str}' class Pad1D(_PadnD): """ This interface is used to construct a callable object of the ``Pad1D`` class. Pad tensor according to ``pad``, ``mode`` and ``value``. If mode is ``reflect``, pad[0] and pad[1] must be no greater than width-1. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to both the left and right side. If `padding` is a list or tuple of two ints, it is interpreted as `(pad_left, pad_right)`. mode (str, optional): Four modes: ``'constant'`` (default), ``'reflect'``, ``'replicate'``, ``'circular'``. Default: ``'constant'``. - 'constant' mode, uses a constant value to pad the input tensor. - 'reflect' mode, uses reflection of the input boundaries to pad the input tensor. - 'replicate' mode, uses input boundaries to pad the input tensor. - 'circular' mode, uses circular input to pad the input tensor. value (float, optional): The value to fill the padded areas. Default is :math:`0.0`. data_format (str, optional): An string from: ``'NCL'``, ``'NLC'``. Specify the data format of the input data. Default: ``'NCL'``. name (str|None, optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: ``None``. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 2, 3) >>> pad = [1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.Pad1D(padding=pad, mode="constant") >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 2, 6], dtype=float32, place=Place(cpu), stop_gradient=True, [[[0., 1., 2., 3., 0., 0.], [0., 4., 5., 6., 0., 0.]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, mode: _PaddingTensorMode = 'constant', value: float = 0.0, data_format: DataLayout1D = "NCL", name: str | None = None, ) -> None: super().__init__(padding, mode, value, data_format, name) class ConstantPad1D(Pad1D): """ This interface is used to construct a callable object of the ``ConstantPad1D`` class. Pads the input tensor boundaries with a constant value. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to both the left and right side. If `padding` is a list or tuple of two ints, it is interpreted as `(pad_left, pad_right)`. value (float): The value to fill the padded areas. data_format (str, optional): An string from: ``'NCL'``, ``'NLC'``. Specify the data format of the input data. Default: ``'NCL'``. name (str|None, optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: ``None``. Shape: - x(Tensor): The input tensor of constantpad1d operator, which is a 3-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of constantpad1d operator, which is a 3-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 2, 3) >>> pad = [1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ConstantPad1D(padding=pad, value=0.5) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 2, 6], dtype=float32, place=Place(cpu), stop_gradient=True, [[[0.5, 1. , 2. , 3. , 0.5, 0.5], [0.5, 4. , 5. , 6. , 0.5, 0.5]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, value: float, data_format: DataLayout1D = "NCL", name: str | None = None, ) -> None: super().__init__(padding, "constant", value, data_format, name) class ReplicationPad1D(Pad1D): """ This interface is used to construct a callable object of the ``ReplicationPad1D`` class. Pads the input tensor boundaries by replicating the edge values. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to both the left and right side. If `padding` is a list or tuple of two ints, it is interpreted as `(pad_left, pad_right)`. data_format (str|None): An string from: "NCL", "NLC". Specify the data format of the input data. Default: ``"NCL"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of replicationpad1d operator, which is a 3-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of replicationpad1d operator, which is a 3-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> # from replication_padding_layers import ReplicationPad1D >>> input_shape = (1, 2, 3) >>> pad = [1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ReplicationPad1D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 2, 6], dtype=float32, place=Place(cpu), stop_gradient=True, [[[1., 1., 2., 3., 3., 3.], [4., 4., 5., 6., 6., 6.]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout1D = "NCL", name: str | None = None, ) -> None: super().__init__(padding, "replicate", 0.0, data_format, name) class ReflectionPad1D(Pad1D): """ This interface is used to construct a callable object of the ``ReflectionPad1D`` class. Pads the input tensor boundaries using reflection of the input boundaries. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to both the left and right side. If `padding` is a list or tuple of two ints, it is interpreted as `(pad_left, pad_right)`. Padding width must be less than the corresponding input dimension. data_format (str|None): An string from: "NCL", "NLC". Specify the data format of the input data. Default: ``"NCL"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of reflectionpad1d operator, which is a 3-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of reflectionpad1d operator, which is a 3-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> # from reflection_padding_layers import ReflectionPad1D >>> input_shape = (1, 2, 3) >>> pad = [1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> # data = [[[1., 2., 3.], [4., 5., 6.]]] >>> my_pad = nn.ReflectionPad1D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 2, 6], dtype=float32, place=Place(cpu), stop_gradient=True, [[[2., 1., 2., 3., 2., 1.], [5., 4., 5., 6., 5., 4.]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout1D = "NCL", name: str | None = None, ) -> None: super().__init__(padding, "reflect", 0.0, data_format, name) class ZeroPad1D(Pad1D): """ This interface is used to construct a callable object of the ``ZeroPad1D`` class. Pads the input tensor boundaries with zero. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to both the left and right side. If `padding` is a list or tuple of two ints, it is interpreted as `(pad_left, pad_right)`. data_format (str|None): An string from: "NCL", "NLC". Specify the data format of the input data. Default: ``"NCL"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of zeropad1d operator, which is a 3-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of zeropad1d operator, which is a 3-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 2, 3) >>> pad = [1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ZeroPad1D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 2, 6], dtype=float32, place=Place(cpu), stop_gradient=True, [[[0., 1., 2., 3., 0., 0.], [0., 4., 5., 6., 0., 0.]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout1D = "NCL", name: str | None = None, ) -> None: super().__init__(padding, "constant", 0.0, data_format, name) class CircularPad1D(Pad1D): """ This interface is used to construct a callable object of the ``CircularPad1D`` class. Pads the input tensor boundaries by circular padding. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to both the left and right side. If `padding` is a list or tuple of two ints, it is interpreted as `(pad_left, pad_right)`. data_format (str|None): An string from: "NCL", "NLC". Specify the data format of the input data. Default: ``"NCL"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of circularpad1d operator, which is a 3-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of circularpad1d operator, which is a 3-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 2, 3) >>> pad = [1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> # data is [[[1., 2., 3.], [4., 5., 6.]]] >>> my_pad = nn.CircularPad1D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 2, 6], dtype=float32, place=Place(cpu), stop_gradient=True, [[[3., 1., 2., 3., 1., 2.], [6., 4., 5., 6., 4., 5.]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout1D = "NCL", name: str | None = None, ) -> None: super().__init__(padding, "circular", 0.0, data_format, name) class Pad2D(_PadnD): """ This interface is used to construct a callable object of the ``Pad2D`` class. Pad tensor according to ``pad``, ``mode`` and ``value``. If mode is ``'reflect'``, pad[0] and pad[1] must be no greater than width-1. The height dimension has the same condition. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all four sides (left, right, top, bottom). If `padding` is a list or tuple of four ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom)`. mode (str, optional): Four modes: ``'constant'`` (default), ``'reflect'``, ``'replicate'``, ``'circular'``. Default: ``'constant'``. - 'constant' mode, uses a constant value to pad the input tensor. - 'reflect' mode, uses reflection of the input boundaries to pad the input tensor. - 'replicate' mode, uses input boundaries to pad the input tensor. - 'circular' mode, uses circular input to pad the input tensor. value (float, optional): The value to fill the padded areas. Default is :math:`0.0`. data_format (str, optional): An string from: ``'NCHW'``, ``'NHWC'``. Specify the data format of the input data. Default: ``'NCHW'``. name (str|None, optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: ``None``. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 1, 2, 3) >>> pad = [1, 0, 1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.Pad2D(padding=pad, mode="constant") >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[0., 0., 0., 0.], [0., 1., 2., 3.], [0., 4., 5., 6.], [0., 0., 0., 0.], [0., 0., 0., 0.]]]]) """ _n_dim = 2 def __init__( self, padding: Tensor | Sequence[int] | int, mode: _PaddingTensorMode = 'constant', value: float = 0.0, data_format: DataLayout2D = "NCHW", name: str | None = None, ) -> None: super().__init__(padding, mode, value, data_format, name) class ConstantPad2D(Pad2D): """ This interface is used to construct a callable object of the ``ConstantPad2D`` class. Pads the input tensor boundaries with a constant value. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all four sides (left, right, top, bottom). If `padding` is a list or tuple of four ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom)`. value (float): The value to fill the padded areas. data_format (str, optional): An string from: ``'NCHW'``, ``'NHWC'``. Specify the data format of the input data. Default: ``'NCHW'``. name (str|None, optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: ``None``. Shape: - x(Tensor): The input tensor of constantpad2d operator, which is a 4-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of constantpad2d operator, which is a 4-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 1, 2, 3) >>> pad = [1, 0, 1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ConstantPad2D(padding=pad, value=0.5) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[0.5, 0.5, 0.5, 0.5], [0.5, 1. , 2. , 3. ], [0.5, 4. , 5. , 6. ], [0.5, 0.5, 0.5, 0.5], [0.5, 0.5, 0.5, 0.5]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, value: float, data_format: DataLayout2D = "NCHW", name: str | None = None, ) -> None: super().__init__(padding, "constant", value, data_format, name) class ReplicationPad2D(Pad2D): """ This interface is used to construct a callable object of the ``ReplicationPad2D`` class. Pads the input tensor boundaries by replicating the edge values. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all four sides (left, right, top, bottom). If `padding` is a list or tuple of four ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom)`. data_format (str|None): An string from: "NCHW", "NHWC". Specify the data format of the input data. Default: ``"NCHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of replicationpad2d operator, which is a 4-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of replicationpad2d operator, which is a 4-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> # from replication_padding_layers import ReplicationPad2D >>> input_shape = (1, 1, 2, 3) >>> pad = [1, 0, 1, 2] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ReplicationPad2D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[1., 1., 2., 3.], [1., 1., 2., 3.], [4., 4., 5., 6.], [4., 4., 5., 6.], [4., 4., 5., 6.]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout2D = "NCHW", name: str | None = None, ) -> None: super().__init__(padding, "replicate", 0.0, data_format, name) class ReflectionPad2D(Pad2D): """ This interface is used to construct a callable object of the ``ReflectionPad2D`` class. Pads the input tensor boundaries using reflection of the input boundaries. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all four sides (left, right, top, bottom). If `padding` is a list or tuple of four ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom)`. Padding width must be less than the corresponding input dimension. data_format (str|None): An string from: "NCHW", "NHWC". Specify the data format of the input data. Default: ``"NCHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of reflectionpad2d operator, which is a 4-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of reflectionpad2d operator, which is a 4-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> # from reflection_padding_layers import ReflectionPad2D >>> input_shape = (1, 1, 2, 3) >>> pad = [1, 0, 1, 1] # L=1, R=0, T=1, B=1 >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> # data = [[[[1., 2., 3.], [4., 5., 6.]]]] >>> my_pad = nn.ReflectionPad2D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 4, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[5., 4., 5., 6.], [2., 1., 2., 3.], [5., 4., 5., 6.], [2., 1., 2., 3.]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout2D = "NCHW", name: str | None = None, ) -> None: super().__init__(padding, "reflect", 0.0, data_format, name) class ZeroPad2D(Pad2D): """ This interface is used to construct a callable object of the ``ZeroPad2D`` class. Pads the input tensor boundaries with zero. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all four sides (left, right, top, bottom). If `padding` is a list or tuple of four ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom)`. data_format (str|None): An string from: "NCHW", "NHWC". Specify the data format of the input data. Default: ``"NCHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of zeropad2d operator, which is a 4-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of zeropad2d operator, which is a 4-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = paddle.to_tensor([1, 1, 2, 3]) >>> pad = [1, 0, 1, 2] >>> data = paddle.arange(paddle.prod(input_shape), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ZeroPad2D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[0., 0., 0., 0.], [0., 1., 2., 3.], [0., 4., 5., 6.], [0., 0., 0., 0.], [0., 0., 0., 0.]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout2D = "NCHW", name: str | None = None, ) -> None: super().__init__(padding, "constant", 0.0, data_format, name) class CircularPad2D(Pad2D): """ This interface is used to construct a callable object of the ``CircularPad2D`` class. Pads the input tensor boundaries by circular padding. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all four sides (left, right, top, bottom). If `padding` is a list or tuple of four ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom)`. data_format (str|None): An string from: "NCHW", "NHWC". Specify the data format of the input data. Default: ``"NCHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of circularpad2d operator, which is a 4-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of circularpad2d operator, which is a 4-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 1, 2, 3) >>> pad = [1, 0, 1, 2] # (L, R, T, B) >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> # data is [[[[1., 2., 3.], >>> # [4., 5., 6.]]]] >>> my_pad = nn.CircularPad2D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[6., 4., 5., 6.], [3., 1., 2., 3.], [6., 4., 5., 6.], [3., 1., 2., 3.], [6., 4., 5., 6.]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout2D = "NCHW", name: str | None = None, ) -> None: super().__init__(padding, "circular", 0.0, data_format, name) class Pad3D(_PadnD): """ This interface is used to construct a callable object of the ``Pad3D`` class. Pad tensor according to ``'pad'``, ``'mode'`` and ``'value'``. If mode is ``'reflect'``, pad[0] and pad[1] must be no greater than width-1. The height and depth dimension has the same condition. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all six sides (left, right, top, bottom, front, back). If `padding` is a list or tuple of six ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom, pad_front, pad_back)`. mode (str, optional): Four modes: ``'constant'`` (default), ``'reflect'``, ``'replicate'``, ``'circular'``. Default: ``'constant'``. - 'constant' mode, uses a constant value to pad the input tensor. - 'reflect' mode, uses reflection of the input boundaries to pad the input tensor. - 'replicate' mode, uses input boundaries to pad the input tensor. - 'circular' mode, uses circular input to pad the input tensor. value (float, optional): The value to fill the padded areas. Default is :math:`0.0`. data_format (str, optional): An string from: ``'NCDHW'``, ``'NDHWC'``. Specify the data format of the input data. Default: ``'NCDHW'``. name (str|None, optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: ``None``. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 1, 1, 2, 3) >>> pad = [1, 0, 1, 2, 0, 0] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.Pad3D(padding=pad, mode="constant") >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[0., 0., 0., 0.], [0., 1., 2., 3.], [0., 4., 5., 6.], [0., 0., 0., 0.], [0., 0., 0., 0.]]]]]) """ _n_dim = 3 def __init__( self, padding: Tensor | Sequence[int] | int, mode: _PaddingTensorMode = 'constant', value: float = 0.0, data_format: DataLayout3D = "NCDHW", name: str | None = None, ) -> None: super().__init__(padding, mode, value, data_format, name) class ConstantPad3D(Pad3D): """ This interface is used to construct a callable object of the ``ConstantPad3D`` class. Pads the input tensor boundaries with a constant value. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all six sides (left, right, top, bottom, front, back). If `padding` is a list or tuple of six ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom, pad_front, pad_back)`. value (float): The value to fill the padded areas. data_format (str, optional): An string from: ``'NCDHW'``, ``'NDHWC'``. Specify the data format of the input data. Default: ``'NCDHW'``. name (str|None, optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: ``None``. Shape: - x(Tensor): The input tensor of constantpad3d operator, which is a 5-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of constantpad3d operator, which is a 5-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 1, 1, 2, 3) >>> pad = [1, 0, 1, 2, 0, 0] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ConstantPad3D(padding=pad, value=0.5) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[0.5, 0.5, 0.5, 0.5], [0.5, 1. , 2. , 3. ], [0.5, 4. , 5. , 6. ], [0.5, 0.5, 0.5, 0.5], [0.5, 0.5, 0.5, 0.5]]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, value: float, data_format: DataLayout3D = "NCDHW", name: str | None = None, ) -> None: super().__init__(padding, "constant", value, data_format, name) class ReplicationPad3D(Pad3D): """ This interface is used to construct a callable object of the ``ReplicationPad3D`` class. Pads the input tensor boundaries by replicating the edge values. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all six sides (left, right, top, bottom, front, back). If `padding` is a list or tuple of six ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom, pad_front, pad_back)`. data_format (str|None): An string from: "NCDHW", "NDHWC". Specify the data format of the input data. Default: ``"NCDHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of replicationpad3d operator, which is a 5-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of replicationpad3d operator, which is a 5-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> # from replication_padding_layers import ReplicationPad3D >>> input_shape = (1, 1, 1, 2, 3) >>> pad = [1, 0, 1, 2, 0, 0] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ReplicationPad3D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[1., 1., 2., 3.], [1., 1., 2., 3.], [4., 4., 5., 6.], [4., 4., 5., 6.], [4., 4., 5., 6.]]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout3D = "NCDHW", name: str | None = None, ) -> None: super().__init__(padding, "replicate", 0.0, data_format, name) class ReflectionPad3D(Pad3D): """ This interface is used to construct a callable object of the ``ReflectionPad3D`` class. Pads the input tensor boundaries using reflection of the input boundaries. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all six sides (left, right, top, bottom, front, back). If `padding` is a list or tuple of six ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom, pad_front, pad_back)`. Padding width must be less than the corresponding input dimension. data_format (str|None): An string from: "NCDHW", "NDHWC". Specify the data format of the input data. Default: ``"NCDHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of reflectionpad3d operator, which is a 5-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of reflectionpad3d operator, which is a 5-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> # from reflection_padding_layers import ReflectionPad3D >>> input_shape = (1, 1, 1, 2, 3) >>> pad = [1, 0, 1, 0, 0, 0] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> # data = [[[[[1., 2., 3.], [4., 5., 6.]]]]] >>> my_pad = nn.ReflectionPad3D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 1, 3, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[5., 4., 5., 6.], [2., 1., 2., 3.], [5., 4., 5., 6.]]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout3D = "NCDHW", name: str | None = None, ) -> None: super().__init__(padding, "reflect", 0.0, data_format, name) class ZeroPad3D(Pad3D): """ This interface is used to construct a callable object of the ``ZeroPad3D`` class. Pads the input tensor boundaries with zero. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all six sides (left, right, top, bottom, front, back). If `padding` is a list or tuple of six ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom, pad_front, pad_back)`. data_format (str|None): An string from: "NCDHW", "NDHWC". Specify the data format of the input data. Default: ``"NCDHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of zeropad3d operator, which is a 5-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of zeropad3d operator, which is a 5-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 1, 1, 2, 3) >>> pad = [1, 0, 1, 2, 0, 0] >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> my_pad = nn.ZeroPad3D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[0., 0., 0., 0.], [0., 1., 2., 3.], [0., 4., 5., 6.], [0., 0., 0., 0.], [0., 0., 0., 0.]]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout3D = "NCDHW", name: str | None = None, ) -> None: super().__init__(padding, "constant", 0.0, data_format, name) class CircularPad3D(Pad3D): """ This interface is used to construct a callable object of the ``CircularPad3D`` class. Pads the input tensor boundaries by circular padding. Parameters: padding (Tensor | Sequence[int] | int): The padding size. If `padding` is an `int`, the same padding is applied to all six sides (left, right, top, bottom, front, back). If `padding` is a list or tuple of six ints, it is interpreted as `(pad_left, pad_right, pad_top, pad_bottom, pad_front, pad_back)`. data_format (str|None): An string from: "NCDHW", "NDHWC". Specify the data format of the input data. Default: ``"NCDHW"`` name (str|None, optional) : The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name`. Shape: - x(Tensor): The input tensor of circularpad3d operator, which is a 5-D tensor. The data type can be float32, float64. - output(Tensor): The output tensor of circularpad3d operator, which is a 5-D tensor. The data type is same as input x. Returns: Tensor: The padded tensor. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> input_shape = (1, 1, 1, 2, 3) # NCDHW >>> pad = [1, 0, 1, 2, 0, 0] # (L, R, T, B, F, K) >>> data = paddle.arange(paddle.prod(paddle.to_tensor(input_shape)), dtype="float32").reshape(input_shape) + 1 >>> # data is [[[[[1., 2., 3.], >>> # [4., 5., 6.]]]]] >>> my_pad = nn.CircularPad3D(padding=pad) >>> result = my_pad(data) >>> print(result) Tensor(shape=[1, 1, 1, 5, 4], dtype=float32, place=Place(cpu), stop_gradient=True, [[[[[6., 4., 5., 6.], [3., 1., 2., 3.], [6., 4., 5., 6.], [3., 1., 2., 3.], [6., 4., 5., 6.]]]]]) """ def __init__( self, padding: Tensor | Sequence[int] | int, data_format: DataLayout3D = "NCDHW", name: str | None = None, ) -> None: super().__init__(padding, "circular", 0.0, data_format, name) class CosineSimilarity(Layer): """ This interface is used to compute cosine similarity between x1 and x2 along axis. Parameters: axis (int): Dimension of vectors to compute cosine similarity. Default is 1. eps (float): Small value to avoid division by zero. Default is 1e-8. Returns: None Examples: .. code-block:: text Case 0: x1 = [[0.8024077 0.9927354 0.27238318 0.8344984 ] [0.48949873 0.5797396 0.65444374 0.66510963] [0.1031398 0.9614342 0.08365563 0.6796464 ] [0.10760343 0.7461209 0.7726148 0.5801006 ]] x2 = [[0.62913156 0.1536727 0.9847992 0.04591406] [0.9098952 0.15715368 0.8671125 0.3156102 ] [0.4427798 0.54136837 0.5276275 0.32394758] [0.3769419 0.8535014 0.48041078 0.9256797 ]] axis = 1 eps = 1e-8 Out: [0.5275037 0.8368967 0.75037485 0.9245899] Code Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> x1 = paddle.to_tensor( ... [ ... [1.0, 2.0, 3.0], ... [2.0, 3.0, 4.0], ... ], ... dtype="float32", ... ) >>> x2 = paddle.to_tensor( ... [ ... [8.0, 3.0, 3.0], ... [2.0, 3.0, 4.0], ... ], ... dtype="float32", ... ) >>> cos_sim_func = nn.CosineSimilarity(axis=0) >>> result = cos_sim_func(x1, x2) >>> print(result) Tensor(shape=[3], dtype=float32, place=Place(cpu), stop_gradient=True, [0.65079135, 0.98058069, 1. ]) """ @param_one_alias(["axis", "dim"]) def __init__(self, axis: int = 1, eps: float = 1e-8) -> None: super().__init__() self._axis = axis self._eps = eps def forward(self, x1: Tensor, x2: Tensor) -> Tensor: return F.cosine_similarity(x1, x2, axis=self._axis, eps=self._eps) def extra_repr(self) -> str: return 'axis={_axis}, eps={_eps}'.format(**self.__dict__) @property def dim(self) -> int: return self._axis @dim.setter def dim(self, value: int) -> None: self._axis = value class Embedding(Layer): r""" Embedding Layer, used to construct a callable object of the ``Embedding`` class. For specific usage, refer to code examples. It implements the function of the Embedding Layer. This layer is used to lookup embeddings vector of ids provided by :attr:`x` . It automatically constructs a 2D embedding matrix based on the input :attr:`num_embeddings` and :attr:`embedding_dim`. The shape of output Tensor is generated by appending an emb_size dimension to the last dimension of the input Tensor shape. Note: The id in :attr:`x` must satisfy :math:`0 <= id < num_embeddings` , otherwise the program will throw an exception and exit. .. code-block:: text Case 1: x is a Tensor. padding_idx = -1 x.data = [[1, 3], [2, 4], [4, 127] x.shape = [3, 2] Given size = [128, 16] output is a Tensor: out.shape = [3, 2, 16] out.data = [[[0.129435295, 0.244512452, ..., 0.436322452], [0.345421456, 0.524563927, ..., 0.144534654]], [[0.345249859, 0.124939536, ..., 0.194353745], [0.945345345, 0.435394634, ..., 0.435345365]], [[0.945345345, 0.435394634, ..., 0.435345365], [0.0, 0.0, ..., 0.0 ]]] # padding data The input padding_idx is less than 0, it is automatically converted to padding_idx = -1 + 128 = 127 It will pad all-zero data when ids is 127. Parameters: num_embeddings (int): Just one element which indicate the size of the dictionary of embeddings. embedding_dim (int): Just one element which indicate the size of each embedding vector respectively. padding_idx(int|float|None, optional): padding_idx needs to be in the interval [-num_embeddings, num_embeddings). If :math:`padding\_idx < 0`, the :math:`padding\_idx` will automatically be converted to :math:`vocab\_size + padding\_idx` . It will output all-zero padding data whenever lookup encounters :math:`padding\_idx` in id. And the padding data will not be updated while training. If set None, it makes no effect to output. Default: None. max_norm(float, optional): If provided, will renormalize the embedding vectors to have a norm larger than :attr:`max\_norm` . It will inplace update the input embedding weight in dynamic graph mode. Default: None. norm_type(float, optional): The p of the p-norm to compute for the max_norm option. Default: 2.0. sparse(bool, optional): The flag indicating whether to use sparse update. This parameter only affects the performance of the backwards gradient update. It is recommended to set True because sparse update is faster. But some optimizer does not support sparse update, such as :ref:`api_paddle_optimizer_adadelta_Adadelta` , :ref:`api_paddle_optimizer_adamax_Adamax` , :ref:`api_paddle_optimizer_lamb_Lamb`. In these case, sparse must be False. Default: False. scale_grad_by_freq(bool, optional): Indicating whether to scale the gradients by the inverse frequency of the word ids in input `x`. Default: False. _weight(Tensor, optional): The learnable weights to be applied to the input embeddings. If :attr:`_weight` is specified, the :attr:`weight_attr` is ignored. Default: None. _freeze(bool, optional): Indicates whether to freeze the embedding weights. If set to True, the provided embedding tensor will be treated as a fixed lookup table and will not be updated during training. If set to False, the provided tensor remains learnable. Default: False. device(PlaceLike, optional): Device where the computation takes place when :attr:`weight_attr` is specified. Default: None dtype(DTypeLike, optional): Data type of the weights when :attr:`weight_attr` is specified. Default: None. weight_attr(ParamAttr|None, optional): To specify the weight parameter property. If set, the :attr:`_freeze` attribute will be ignored and whether the weight is trainable depends on the ``trainable`` option in ``weight_attr`. Default: None, which means the default weight parameter property is used. See usage for details in :ref:`api_paddle_ParamAttr` . In addition, user-defined or pre-trained word vectors can be loaded with the :attr:`param_attr` parameter. The local word vector needs to be transformed into numpy format, and the shape of local word vector should be consistent with :attr:`num_embeddings` . Then :ref:`api_paddle_nn_initializer_Assign` is used to load custom or pre-trained word vectors. See code example for details. name(str|None, optional): For detailed information, please refer to :ref:`api_guide_Name`. Usually name is no need to set and None by default. Attribute: **weight** (Parameter): the learnable weights of this layer. Returns: None Examples: .. code-block:: pycon >>> import paddle >>> x = paddle.to_tensor([[0], [1], [3]], dtype="int64", stop_gradient=False) >>> embedding = paddle.nn.Embedding(4, 3, sparse=True) >>> w0 = paddle.to_tensor( ... [ ... [0.0, 0.0, 0.0], ... [1.0, 1.0, 1.0], ... [2.0, 2.0, 2.0], ... [3.0, 3.0, 3.0], ... ], ... dtype="float32", ... ) >>> embedding.weight.set_value(w0) >>> print(embedding.weight) Parameter containing: Tensor(shape=[4, 3], dtype=float32, place=Place(cpu), stop_gradient=False, [[0., 0., 0.], [1., 1., 1.], [2., 2., 2.], [3., 3., 3.]]) >>> adam = paddle.optimizer.Adam(parameters=[embedding.weight], learning_rate=0.01) >>> adam.clear_grad() >>> out = embedding(x) >>> print(out) Tensor(shape=[3, 1, 3], dtype=float32, place=Place(cpu), stop_gradient=False, [[[0., 0., 0.]], [[1., 1., 1.]], [[3., 3., 3.]]]) >>> out.backward() >>> adam.step() """ weight: Tensor def __init__( self, num_embeddings: int, embedding_dim: int, padding_idx: float | None = None, max_norm: float | None = None, norm_type: float = 2.0, *, scale_grad_by_freq: bool = False, sparse: bool = False, _weight: Tensor | None = None, _freeze: bool = False, device: PlaceLike | None = None, dtype: DTypeLike | None = None, weight_attr: ParamAttrLike | None = None, name: str | None = None, ) -> None: super().__init__() self._num_embeddings = num_embeddings self._embedding_dim = embedding_dim self._sparse = sparse self._is_distributed = False self._max_norm = max_norm self._norm_type = norm_type self._padding_idx = padding_idx self._scale_grad_by_freq = scale_grad_by_freq self._device = device if self._num_embeddings <= 0: raise ValueError("num_embeddings must be gather than 0") if self._embedding_dim <= 0: raise ValueError("embedding_dim must be gather than 0") padding_idx = ( -1 if padding_idx is None else ( padding_idx if padding_idx >= 0 else (num_embeddings + padding_idx) ) ) if padding_idx >= num_embeddings or padding_idx < -num_embeddings: raise ValueError( f"padding_idx must be within [-{num_embeddings}, {num_embeddings})" ) self._dtype = ( self._helper.get_default_dtype() if dtype is None else dtype ) self._size = [self._num_embeddings, self._embedding_dim] self._weight_attr = weight_attr self._remote_prefetch = False self._name = name if _weight is not None: assert list(_weight.shape) == [ num_embeddings, embedding_dim, ], "Shape of weight does not match num_embeddings and embedding_dim" self.weight = _weight self.weight.stop_gradient = _freeze else: self.weight = self.create_parameter( attr=self._weight_attr, shape=self._size, dtype=self._dtype, is_bias=False, device=self._device, ) if self._weight_attr is None: self.weight.stop_gradient = _freeze if ( in_dynamic_mode() and padding_idx != -1 and self.weight._is_initialized() ): with paddle.no_grad(): self.weight[padding_idx] = 0.0 @property def padding_idx(self): return self._padding_idx @padding_idx.setter def padding_idx(self, value): self._padding_idx = value @param_one_alias(["x", "input"]) def forward(self, x: Tensor) -> Tensor: return F.embedding( x, weight=self.weight, padding_idx=self._padding_idx, max_norm=self._max_norm, norm_type=self._norm_type, sparse=self._sparse, scale_grad_by_freq=self._scale_grad_by_freq, name=self._name, ) def extra_repr(self) -> str: main_str = '{_num_embeddings}, {_embedding_dim}' if self._padding_idx is not None: main_str += ', padding_idx={_padding_idx}' main_str += ', sparse={_sparse}' main_str += ', scale_grad_by_freq={_scale_grad_by_freq}' if self._name is not None: main_str += ', name={_name}' return main_str.format(**self.__dict__) class Unfold(Layer): """ Returns a col buffer of sliding local blocks of input x, also known as im2col for batched 2D image tensors. For each block under the convolution filter, all element will be rearranged as a column. While the convolution filter sliding over the input feature map, a series of such columns will be formed. For each input :math:`x` with shape [N, C, H, W], the output shape [N, Cout, Lout] can be calculated as following. See ``paddle.nn.functional.unfold`` for more details. Parameters: kernel_sizes(int|list|tuple): The size of convolution kernel, should be [k_h, k_w] or an integer k treated as [k, k]. strides(int|list|tuple, optional): The strides, should be [stride_h, stride_w] or an integer stride treated as [stride, stride]. For default, strides will be [1, 1]. paddings(int|list|tuple, optional): The paddings of each dimension, should be [padding_top, padding_left, padding_bottom, padding_right] or [padding_h, padding_w] or an integer padding. If [padding_h, padding_w] was given, it will expanded to [padding_h, padding_w, padding_h, padding_w]. If an integer padding was given, [padding, padding, padding, padding] will be used. For default, paddings will be [0, 0, 0, 0]. dilations(int|list|tuple, optional): The dilations of convolution kernel, should be [dilation_h, dilation_w], or an integer dilation treated as [dilation, dilation]. For default, it will be [1, 1]. name(str|None, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> x = paddle.randn((100, 3, 224, 224)) >>> unfold = nn.Unfold(kernel_sizes=[3, 3]) >>> result = unfold(x) >>> print(result.shape) paddle.Size([100, 27, 49284]) """ kernel_sizes: Size2 dilations: Size2 paddings: Size2 | Size4 strides: Size2 name: str | None @ForbidKeywordsDecorator( illegal_keys={"kernel_size", "dilation", "padding", "stride"}, func_name="paddle.nn.Unfold", correct_name="paddle.compat.nn.Unfold", url_suffix="torch.nn.Unfold", ) def __init__( self, kernel_sizes: Size2, dilations: Size2 = 1, paddings: Size2 | Size4 = 0, strides: Size2 = 1, name: str | None = None, ) -> None: super().__init__() self.kernel_sizes = kernel_sizes self.dilations = dilations self.paddings = paddings self.strides = strides self.name = name def forward(self, input: Tensor) -> Tensor: return F.unfold( input, kernel_sizes=self.kernel_sizes, strides=self.strides, paddings=self.paddings, dilations=self.dilations, name=self.name, ) def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'kernel_size={self.kernel_sizes}, dilation={self.dilations}, padding={self.paddings}, stride={self.strides}{name_str}' class Fold(Layer): r""" Combines an array of sliding local blocks into a large containing tensor. also known as col2im when operated on batched 2D image tensor. Fold calculates each combined value in the resulting large tensor by summing all values from all containing blocks. For each input :math:`x` with shape [N, C_in , L], the output shape [N, C_out, H_out, W_out] can be calculated as following. .. math:: H_{out} &= output\_size[0] \\ W_{out} &= output\_size[1] \\ C_{out} &= \frac{C_{in}}{kernel\_sizes[0]\times kernel\_sizes[1]} \\ Parameters: output_sizes(list): The size of output size, should be [output_size_h, output_size_w] or an integer o treated as [o, o]. kernel_sizes(int|list|tuple): The size of convolution kernel, should be [k_h, k_w] or an integer k treated as [k, k]. strides(int|list|tuple, optional): The strides, should be [stride_h, stride_w] or an integer stride treated as [stride, stride]. For default, strides will be [1, 1]. paddings(int|list|tuple, optional): The paddings of each dimension, should be [padding_top, padding_left, padding_bottom, padding_right] or [padding_h, padding_w] or an integer padding. If [padding_h, padding_w] was given, it will expanded to [padding_h, padding_w, padding_h, padding_w]. If an integer padding was given, [padding, padding, padding, padding] will be used. For default, paddings will be [0, 0, 0, 0] dilations(int|list|tuple, optional): The dilations of convolution kernel, should be [dilation_h, dilation_w], or an integer dilation treated as [dilation, dilation]. For default, it will be [1, 1]. name(str|None, optional): The default value is None. Normally there is no need for user to set this property. For more information, please refer to :ref:`api_guide_Name` Returns: The tensor formed by combining a group of sliding local blocks The output shape is [N, Cout, H, W] as described above. Examples: .. code-block:: pycon >>> import paddle >>> import paddle.nn as nn >>> x = paddle.randn([2, 3*2*2, 12]) >>> fold = nn.Fold(output_sizes=[4, 5], kernel_sizes=2) >>> y = fold(x) >>> print(y.shape) paddle.Size([2, 3, 4, 5]) """ output_sizes: Size2 kernel_sizes: Size2 dilations: Size2 paddings: Size2 | Size4 strides: Size2 name: str | None @ParamAliasDecorator( { "output_sizes": ["output_size"], "kernel_sizes": ["kernel_size"], "strides": ["stride"], "paddings": ["padding"], "dilations": ["dilation"], } ) def __init__( self, output_sizes: Size2, kernel_sizes: Size2, dilations: Size2 = 1, paddings: Size2 | Size4 = 0, strides: Size2 = 1, name: str | None = None, ) -> None: super().__init__() self.output_sizes = output_sizes self.kernel_sizes = kernel_sizes self.dilations = dilations self.paddings = paddings self.strides = strides self.name = name def forward(self, input: Tensor) -> Tensor: return F.fold( input, output_sizes=self.output_sizes, kernel_sizes=self.kernel_sizes, strides=self.strides, paddings=self.paddings, dilations=self.dilations, name=self.name, ) def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'kernel_size={self.kernel_sizes}, dilation={self.dilations}, padding={self.paddings}, stride={self.strides}{name_str}' @property def output_size(self) -> Size2: return self.output_sizes @output_size.setter def output_size(self, value: Size2) -> None: self.output_sizes = value @property def kernel_size(self) -> Size2: return self.kernel_sizes @kernel_size.setter def kernel_size(self, value: Size2) -> None: self.kernel_sizes = value @property def stride(self) -> Size2: return self.strides @stride.setter def stride(self, value: Size2) -> None: self.strides = value @property def padding(self) -> Size2 | Size4: return self.paddings @padding.setter def padding(self, value: Size2 | Size4) -> None: self.paddings = value @property def dilation(self) -> Size2: return self.dilations @dilation.setter def dilation(self, value: Size2) -> None: self.dilations = value class Flatten(Layer): """ This interface is used to construct a callable object of the ``Flatten`` class. For more details, refer to code examples. It implements flatten a contiguous range of dims into a tensor. Parameters: start_axis(int): first dim to flatten (default = 1) Alias: ``start_dim``. stop_axis(int): last dim to flatten (default = -1). Alias: ``end_dim``. Returns: None Examples: .. code-block:: pycon >>> import paddle >>> inp = paddle.ones([5, 2, 3, 4]).astype('float32') >>> flatten = paddle.nn.Flatten(start_axis=1, stop_axis=2) >>> y = flatten(inp) >>> print(y.shape) paddle.Size([5, 6, 4]) """ start_axis: int stop_axis: int @param_two_alias(["start_axis", "start_dim"], ["stop_axis", "end_dim"]) def __init__(self, start_axis: int = 1, stop_axis: int = -1) -> None: super().__init__() self.start_axis = start_axis self.stop_axis = stop_axis def forward(self, input: Tensor) -> Tensor: out = paddle.flatten( input, start_axis=self.start_axis, stop_axis=self.stop_axis ) return out class Unflatten(Layer): """ This interface is used to construct a callable object of the ``Unflatten`` class. For more details, refer to code examples. It a certain dimension of the input x Tensor into a desired shape. Parameters: axis (int): :attr:`axis` to be unflattened, specified as an index into `x.shape`. shape (list|tuple|Tensor): Unflatten :attr:`shape` on the specified :attr:`axis`. At most one dimension of the target :attr:`shape` can be -1. If the input :attr:`shape` does not contain -1 , the product of all elements in ``shape`` should be equal to ``x.shape[axis]``. The data type is `int` . If :attr:`shape` is a list or tuple, the elements of it should be integers or Tensors with shape []. If :attr:`shape` is an Tensor, it should be an 1-D Tensor. name(str|None, optional): For details, please refer to :ref:`api_guide_Name`. Generally, no setting is required. Default: None. Returns: None Examples: .. code-block:: pycon >>> import paddle >>> x = paddle.randn(shape=[4, 6, 8]) >>> shape = [2, 3] >>> axis = 1 >>> unflatten = paddle.nn.Unflatten(axis, shape) >>> res = unflatten(x) >>> print(res.shape) paddle.Size([4, 2, 3, 8]) """ axis: int shape: ShapeLike name: str | None def __init__( self, axis: int, shape: ShapeLike, name: str | None = None ) -> None: super().__init__() self.axis = axis self.shape = shape self.name = name def forward(self, input: Tensor) -> Tensor: out = paddle.unflatten( input, axis=self.axis, shape=self.shape, name=self.name ) return out def extra_repr(self) -> str: name_str = f', name={self.name}' if self.name else '' return f'axis={self.axis}, shape={self.shape}{name_str}'