This sample, sampleSafePluginV3, consists of two parts: build and infer. The build part of this sample demonstrates how to use the builder in safety for networks that include plugins. The inference part of this sample demonstrates how to use the safe runtime and engine for networks that include plugins.

The build part builds a safe version of a TensorRT engine and saves it into a binary file, then the infer part loads the prebuilt safe engine and performs inference on an input image. The infer part uses the safety header proxy, with the following build steps demonstrating how to build it against the safe runtime for deployment and development.

Workflow for safety plugin deployment

The deployment of the safety plugin on QNX safety involves a series of steps designed to ensure reliability. The recommended workflow is as follows:

Build safety plugin for QNX standard platform and proxy plugin for X86 platform.
Build safety engine from X86 platform through remote auto-tuning on QNX safety platform.
Run safety engine with safety plugin on QNX standard platform with proxy runtime to perform necessary testing.
Build safety plugin for QNX safety platform.
Deploy safety engine on QNX safety platform with safety plugin.

How does this sample work?

This sample uses an ONNX model that was trained on the MNIST dataset.

Specifically, this sample:

Registers a Max Pooling plugin
Performs the basic setup and initialization of TensorRT using the ONNX parser
Imports a trained ONNX model using the ONNX parser
Preprocesses the input and stores the result in a managed buffer
Builds a safe engine
Serializes and deserializes the engine
Uses the engine to perform inference on an input image

To verify whether the engine is operating correctly, this sample picks a 28x28 image of a digit at random and runs inference on it using the engine it created. The output of the network is a probability distribution on the digit, showing which digit is likely that in the image.

Register safe plugin creator

ISafePluginCreatorV3One will be used by TensorRT's builder for engine creation. You would need to register the safe plugin creator into the safePluginRegistry for engine generation and validation. The current sample registers MaxPoolCreator in namespace "" to parse and verify model mnist_safe_plugin.onnx.

  auto safePluginRegistry = nvinfer2::safe::getSafePluginRegistry(g_recorder);
  safePluginRegistry->registerCreator(maxPoolPluginCreator, "", g_recorder);

Prerequisites

Preparing sample data

See Preparing sample data in the main samples README.

Running the sample

Verify that the MNIST images are in $TRT_DATADIR/mnist and the ONNX network mnist_safe_plugin.onnx is in $TRT_DATADIR/safe_plugin.
Compile the sample by following the build instructions in the TensorRT README. This will build the sample binaries, including sample_plugin_safe_build and sample_plugin_safe_infer.
The options that control compiling against safety runtime are summarized in the following table.

Compile Option Default Description

TRT_SAFETY_INFERENCE_ONLY OFF When enabled, build the infer part only, skip compiling the builder part.
Run the sample to build a TensorRT safe engine.
```
./sample_plugin_safe_build [--datadir=/path/to/data/dir/] [--remoteAutoTuningConfig=<config>] [--cpuOnly]
```
This sample generates safe_plugin.engine, which is a binary file that contains the serialized engine data.

This sample reads ONNX model to build the network:
```
- `mnist_safe_plugin.onnx` - The ONNX model that contains the network design with maxPoolPlugin, version 1, namespace ""
```
Note: By default, this sample expects these files to be in either the data/samples/safe_plugin/ or data/safe_plugin/ directories. The list of default directories can be changed by adding one or more paths with --datadir=/new/path/ as a command line argument.

Compile Option	Default	Description
TRT_SAFETY_INFERENCE_ONLY	OFF	When enabled, build the infer part only, skip compiling the builder part.

Verify that the sample ran successfully. If the sample runs successfully you should see output similar to the following:

&&&& RUNNING TensorRT.sample_safe_plugin_build [TensorRT v101200] [b5] # sample_plugin_safe_build --datadir=data/samples/safe_plugin/
[04/23/2025-08:07:23] [I] Building a GPU inference engine for MNIST with plugins
[04/23/2025-08:07:24] [I] [TRT] [MemUsageChange] Init CUDA: CPU +26, GPU +0, now: CPU 35, GPU 422 (MiB)
[04/23/2025-08:07:36] [I] [TRT] [MemUsageChange] Init builder kernel library: CPU +1639, GPU +8, now: CPU 1874, GPU 430 (MiB)
[04/23/2025-08:07:36] [I] [TRT] ----------------------------------------------------------------
[04/23/2025-08:07:36] [I] [TRT] Input filename:   data/samples/safe_plugin/mnist_safe_plugin.onnx
[04/23/2025-08:07:36] [I] [TRT] ONNX IR version:  0.0.7
[04/23/2025-08:07:36] [I] [TRT] Opset version:    8
[04/23/2025-08:07:36] [I] [TRT] Producer name:
[04/23/2025-08:07:36] [I] [TRT] Producer version:
[04/23/2025-08:07:36] [I] [TRT] Domain:
[04/23/2025-08:07:36] [I] [TRT] Model version:    0
[04/23/2025-08:07:36] [I] [TRT] Doc string:
[04/23/2025-08:07:36] [I] [TRT] ----------------------------------------------------------------
[04/23/2025-08:07:36] [I] [TRT] Searching for plugin: MaxPoolPlugin, plugin_version: 1, plugin_namespace:
[04/23/2025-08:07:36] [W] [TRT] onnxOpImporters.cpp:6641: Attribute pType not found in plugin node! Ensure that the plugin creator has a default value defined or the engine may fail to build.
[04/23/2025-08:07:36] [I] [TRT] Successfully created plugin: MaxPoolPlugin
[04/23/2025-08:07:40] [I] [TRT] Local timing cache in use. Profiling results in this builder pass will not be stored.
[04/23/2025-08:07:40] [I] [TRT] Compiler backend is used during engine build.
[04/23/2025-08:07:57] [I] [TRT] Detected 1 inputs and 1 output network tensors.
[04/23/2025-08:07:57] [I] [TRT] Total Host Persistent Memory: 0 bytes
[04/23/2025-08:07:57] [I] [TRT] Total Device Persistent Memory: 0 bytes
[04/23/2025-08:07:57] [I] [TRT] Max Scratch Memory: 0 bytes
[04/23/2025-08:07:57] [I] [TRT] Total Activation Memory: 0 bytes
[04/23/2025-08:07:57] [I] [TRT] Total Weights Memory: 0 bytes
[04/23/2025-08:07:57] [I] [TRT] Engine generation completed in 16.9161 seconds.
[04/23/2025-08:07:57] [I] [TRT] [MemUsageStats] Peak memory usage of TRT CPU/GPU memory allocators: CPU 0 MiB, GPU 1 MiB
&&&& PASSED TensorRT.sample_safe_plugin_build [TensorRT v101200] [b5] # sample_plugin_safe_build --datadir=data/samples/safe_plugin/

This output shows that the sample ran successfully: PASSED.

Run the sample to perform inference on the digit: ./sample_plugin_safe_infer

Note: This sample expects ./sample_plugin_safe_build has been run to generate a safe engine file. It loads input image from data/samples/mnist directory, and walks back 10 directories to locate the image.

Verify that the sample ran successfully. If the sample runs successfully you should see output similar to the following; ASCII rendering of the input image with digit 0:

Input:
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@+  :@@@@@@@@
@@@@@@@@@@@@@@%= :. --%@@@@@
@@@@@@@@@@@@@%. -@= - :@@@@@
@@@@@@@@@@@@@: -@@#%@@ #@@@@
@@@@@@@@@@@@: #@@@@@@@-#@@@@
@@@@@@@@@@@= #@@@@@@@@=%@@@@
@@@@@@@@@@= #@@@@@@@@@:@@@@@
@@@@@@@@@+ -@@@@@@@@@%.@@@@@
@@@@@@@@@::@@@@@@@@@@+-@@@@@
@@@@@@@@-.%@@@@@@@@@@.*@@@@@
@@@@@@@@ *@@@@@@@@@@@ *@@@@@
@@@@@@@% %@@@@@@@@@%.-@@@@@@
@@@@@@@:*@@@@@@@@@+. %@@@@@@
@@@@@@# @@@@@@@@@# .*@@@@@@@
@@@@@@# @@@@@@@@=  +@@@@@@@@
@@@@@@# @@@@@@%. .+@@@@@@@@@
@@@@@@# @@@@@*. -%@@@@@@@@@@
@@@@@@# ---    =@@@@@@@@@@@@
@@@@@@#      *%@@@@@@@@@@@@@
@@@@@@@%: -=%@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Set address of Input3 on device at 7fcb26612600
Set address of Output on device at 7fcb26613400
Output:
Prob 0  0.9998 Class 0: **********
Prob 1  0.0000 Class 1:
Prob 2  0.0000 Class 2:
Prob 3  0.0000 Class 3:
Prob 4  0.0000 Class 4:
Prob 5  0.0000 Class 5:
Prob 6  0.0002 Class 6:
Prob 7  0.0000 Class 7:
Prob 8  0.0000 Class 8:
Prob 9  0.0000 Class 9:
&&&& PASSED TensorRT.sample_plugin_safe_infer # sample_plugin_safe_infer

This output shows that the sample ran successfully: PASSED.

Tool command line arguments

To see the full list of available options and their descriptions, use the -h or --help command line option.

sample_plugin_safe_build --help
sample_plugin_safe_infer --help

When to use remoteAutoTuningConfig

The --remoteAutoTuningConfig parameter is designed for cross-platform development scenarios where you need to:

Primary Use Case - Cross-Platform Building:

Build on Host Platform: Compile and build TensorRT engines on a development machine (e.g., Linux x86_64)
Auto-tune on Target Platform: Perform kernel auto-tuning on the actual deployment target (e.g., QNX aarch64)

Use --cpuOnly with --remoteAutoTuningConfig to build the engine without a local GPU on the build host:

./sample_plugin_safe_build --remoteAutoTuningConfig=<config> --cpuOnly

Typical Scenarios:

QNX Development: Building engines on Linux development machines but deploying on QNX automotive platforms

Important Technical Limitation:

QNX Safety Devices: QNX safety platforms do NOT support engine building operations. All engine construction must be performed on development platforms (Linux/QNX standard), making remote auto-tuning essential for safety deployments.

Security Consideration:

Use PROMPT as password on the command line in order to be interactively prompted for the password. This avoids leaking the password into the shell history. This functionality is only supported on Linux x86 -- the remote autotuning flow runs autotuning on an x86 Linux host which communicates over SSH to the aarch64 QNX machine.

Shared plugin library and trtexec

Safety plugins must be built into shared libraries and dynamically loaded in applications. As shown in this sample, users may declare and register a plugin creator from their application directly, or define a plugin creator registering function within their plugin libraries themselves. In other words, we present a method that supports the manual registration of safety plugins from within a shared plugin library. Safety plugin libraries adhering to this protocol can be utilized with both trtexec and trtexec_safe.

Creation of safety plugin library

After implementing the plugin creator, create an API entry function getSafetyPluginCreator to pull in the plugin creator. The entry function takes pluginNamespace and pluginName as arguments. If the input plugin namespace and name are valid, the function shall construct a pluginCreator instance, and return a pointer to the instance.

extern "C" __attribute__((visibility("default"))) nvinfer2::safe::IPluginCreatorInterface* getSafetyPluginCreator(
    char const* pluginNamespace, char const* pluginName)

Please refer to maxPoolPluginCreatorInterface.cpp and maxPoolPluginRuntimeCreatorInterface.cpp for sample implementations.

Using the plugin library with trtexec and trtexec_safe

Both trtexec and trtexec_safe support the --safetyPlugins argument, where you specify safety plugins to load from a safety plugin library that implements the manual-registration protocol. The sample plugin and its creator interface will be built into the shared libraries libsample_safe_plugin_v3.so(Linux x86_64 platform) for BUILD and RUNTIME capability and libsample_safe_plugin_v3_safe.so(QNX-safe platform) for RUNTIME only capability.

Sample command to build, validate, and save the safety engine on Linux x86_64 platform.

trtexec --onnx=$TRT_DATADIR/safe_plugin/mnist_safe_plugin.onnx --safe --skipInference --fp16 --consistency --safetyPlugins=libsample_safe_plugin_v3.so[::MaxPoolPlugin] --saveEngine=sample.engine

Sample command to run the pre-built engine on the QNX-safe platform.

trtexec_safe --loadEngine=sample.engine --safetyPlugins=libsample_safe_plugin_v3_safe.so[::MaxPoolPlugin]

Additional resources

The following resources provide a deeper understanding about sampleSafePluginV3.

Dataset

Sample data available in TensorRT GitHub Releases.

Documentation

NVIDIA’s TensorRT Documentation Library

License

For terms and conditions for use, reproduction, and distribution, see the TensorRT Software License Agreement documentation.

Changelog

Apr. 2025
- This is the first release of the README.md file and sample.

Jul. 2025 This sample was updated for the TRT 10.13.1 safety release.

Dec. 2025 This sample was updated to use the CMake-based build system.

Apr. 2026 This sample was updated to add the --cpuOnly build option for remote auto-tuning workflows without requiring a local GPU on the build host.

Known issues

There are no known issues in this sample.

README.md Unescape Escape

Plugin Sample For TensorRT Safety

Description